Get quotes for a used or replacement Škoda Kamiq air flow meter. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two air flow meters are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
It depends on the engine variant. The Kamiq's petrol engines — including the 1.0 TSI and 1.5 TSI — use a Mass Air Flow (MAF) sensor, so yes, those variants do have an air flow meter. However, if your Kamiq is a diesel (the 1.6 TDI was offered in some markets), fitment varies by engine management setup, so confirm with the breaker using your registration. The key point is that turbocharged direct-injection engines like the TSI units do use a MAF sensor as a standard component.
The Kamiq launched in the UK in 2019 and received a facelift around 2021-2022, so a 2019 car sits in the pre-facelift period and a 2022 car in the facelifted generation. The engine codes are the most reliable guide here — if both cars share the same engine code (for example, both are DKLA 1.0 TSI units), compatibility is more likely, but whether ancillary or sensor mounting changed at the facelift is something you should confirm with the breaker against your specific registration rather than assume. Never rely on model year alone.
No — trim level makes no difference to air flow meter fitment on the Kamiq. SE, SE L, and Monte Carlo are specification packages covering interior, cosmetics, and equipment levels, not engine hardware. What matters is the engine code, which will be the same across trims sharing the same engine option. When contacting a breaker, quote your engine code (found on your V5C or via a VIN check) rather than your trim name.
Possibly, because the Kamiq shares Volkswagen Group's MQB A0 platform and the 1.0 TSI engine family is used across Škoda, VW, SEAT, and Audi models from roughly the same period. If the engine codes match exactly, cross-platform compatibility is a realistic prospect that many breakers will recognise. However, confirming that the specific part number and sensor connector are identical is essential before purchasing, so ask the breaker to verify against your engine code and registration.
The air flow meter is mounted in the intake system and is determined by the engine, not the gearbox. A 1.0 TSI Kamiq with a manual gearbox and a 1.0 TSI Kamiq with a DSG automatic should use the same MAF sensor, provided the engine codes match. That said, if there are any ECU calibration differences between transmission variants, confirm with the breaker — pairing or coding requirements are something to raise with them rather than assume away.
The single most useful thing you can do is supply your engine code to the breaker — it's stamped on the engine block and also listed on your V5C logbook, or retrievable via a VIN check. Engine code, combined with your registration, allows a breaker to pinpoint the correct MAF sensor and check for any mid-production changes that might affect fitment. Year, fuel type, and gearbox type are useful supporting details, but the engine code is the definitive starting point.