Compare prices on a used Škoda Kamiq glove box from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
The Kamiq has been sold in the UK as a single generation launched in 2019, so glove boxes from other Kamiq models of that generation should generally be compatible. However, trim level can affect the interior finish and whether the glove box is illuminated or has a cooling function, so confirm the spec of the donor car with the breaker against your registration. Engine type makes no difference to glove box fitment.
The basic glove box opening and mounting should be the same across Kamiq trim levels, but higher trims such as SE L and Monte Carlo may feature a cooled or illuminated glove box that S and SE models do not, meaning the unit may not be a straightforward drop-in swap between all trim levels. When sourcing a used glove box, tell the breaker your exact trim so they can match the correct specification. If you are fitting a higher-spec unit into a lower-spec car, bear in mind the cooling or lighting function may not work without additional wiring.
The Kamiq, Scala, and Karoq all sit on the MQB-A0 or MQB platform family and share some interior architecture, but dashboard designs differ between models, so glove boxes are unlikely to be a direct swap. You should always cross-reference the part against your specific vehicle registration with the breaker rather than assuming platform compatibility guarantees fitment. Stick to parts pulled from a Kamiq donor car for the best chance of a straightforward fit.
Both a 2020 and 2022 Kamiq fall within the same generation, so the glove box is likely to be compatible provided the trim level and any optional features such as cooling match between the two cars. There was a mild refresh applied to the Kamiq during its production run, so it is worth asking the breaker to confirm the part number against your registration to rule out any minor interior changes. Engine specification has no bearing on glove box fitment.
No, engine type has no effect on glove box fitment on the Kamiq – the part is purely an interior component and is identical regardless of whether the car is petrol, diesel, or mild hybrid. Focus instead on matching the generation and trim level to ensure any optional features like cooling or illumination are consistent with your car. Always give the breaker your full registration to confirm the correct part.
Glove box replacement on the Kamiq is generally a straightforward job involving releasing a few clips or screws and disconnecting any wiring for lighting or cooling if present, making it a realistic DIY task for a competent home mechanic. If your replacement glove box has a cooling function, you will need to ensure the ducting and wiring connections are properly reconnected. There are no safety-critical systems involved, so professional fitting is not required, though a trim removal toolkit is recommended to avoid damaging surrounding panels.