Get quotes for a used or replacement Škoda Fabia clutch slave cylinder. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used clutch slave cylinders vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Fabia uses a hydraulic clutch system on manual gearbox variants, and yes, it does have a clutch slave cylinder — on many variants this is a concentric slave cylinder (CSC) that sits inside the bell housing rather than an external unit mounted on the gearbox. This is important to know when sourcing a used part, because the CSC is released as part of a specific assembly and must match your engine and gearbox combination. Automatic and DSG-equipped Fabias do not have a clutch slave cylinder at all, so confirm you have a manual gearbox before ordering.
The Mk1 Fabia ran from 1999 to 2007 and the Mk2 from 2007 to 2014, and these are distinct generations on different platforms, so the slave cylinder from a Mk1 is very unlikely to be a direct swap onto a Mk2. Even where the same engine code carried across the generation boundary — for example the 1.2 HTP or 1.4 TDI — ancillary and gearbox mounting arrangements can differ between generations. Name your exact engine code (found on your V5 or a VIN check) and confirm fitment with the breaker against your registration before buying.
Trim level — whether Ambition, Elegance, SE, Monte Carlo, or vRS — does not affect clutch slave cylinder fitment; what matters is the engine code, gearbox type, and the generation of the car. The vRS is worth calling out specifically: on the Mk2 generation the vRS used the 1.4 TSI twin-charger engine, which is a different setup to the 1.2 or 1.4 non-turbo units, so a vRS slave cylinder may well differ from those fitted to mainstream trim cars. Always identify your engine code first and let the breaker match from there rather than searching by trim name alone.
Both 2010 and 2012 fall within the Mk2 Fabia generation (2007–2014), so there is a reasonable chance of compatibility if the engine codes and gearbox types match. However, the Mk2 received a facelift in 2010, and ancillary component specifications can sometimes shift around facelift points even within the same generation. Confirm the engine code on both cars and check with the breaker against your specific registration to be sure.
The Mk3 Fabia launched in 2014 on a newer platform and with an updated engine range, so slave cylinders from this generation are not considered a straightforward interchange with Mk2 parts. The Mk3 was later updated in 2018 and then replaced by the Mk4 from 2021, adding further variation within the 'Mk3' era. Match by engine code and gearbox type for your specific year, and verify interchangeability with the breaker rather than assuming generation-to-generation compatibility.
The single most useful detail is your engine code — a three or four letter code found on your V5 logbook or via a VIN check — because the slave cylinder follows the engine and gearbox combination, not the badge or body style. You should also confirm that your car has a manual gearbox, state the year of the car, and ideally name the gearbox code too if you have it. The more of this information you give the breaker upfront, the more confidently they can confirm whether their part matches yours before it is dispatched.