Compare prices on a used Škoda Fabia inlet manifold from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two inlet manifolds are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Fabia has run across three main generations — Mk1 (2000–2007), Mk2 (2007–2015), and Mk3 (2015–2021) — and inlet manifolds do not typically cross between generations because the engine families changed significantly at each point. Even within a generation there were facelifts and engine updates, so a manifold that fits a 2008 Mk2 may not suit a 2013 Mk2 if the engine code differs. The engine code is the single most reliable guide, so check your V5 or run a VIN check and share that code with the breaker before ordering.
No — petrol and diesel engines have completely different inlet manifold designs and the parts are not interchangeable at all. Diesel Fabias, particularly those fitted with the 1.4 TDI or 1.6 TDI engines, use a manifold matched to diesel combustion requirements, while petrol variants such as the 1.2 or 1.4 MPI and TSI engines use entirely different units. Always confirm your fuel type and engine code with the breaker.
Trim level makes no difference whatsoever to inlet manifold fitment — Ambition, Colour Edition, Monte Carlo, and any other Fabia trim all use the manifold dictated by their engine, not their badge. What matters is whether two cars share the same engine code, which you can find on your V5 document. Tell the breaker your engine code and they will match the right part regardless of trim.
This is an important boundary to flag: the Mk2 Fabia ran until around 2014–2015 and the Mk3 launched from 2015 onwards, meaning a 2014 car is almost certainly Mk2 while a 2016 car is Mk3, and the engine families between those generations differ enough that cross-generation fitment is unlikely. Even if both cars appear to share a similar engine displacement, the engine codes are often different across that boundary. Confirm both engine codes with the breaker before assuming a 2015 or 2016 part will suit your 2014 car.
Body style has no bearing on inlet manifold fitment — the manifold is determined entirely by the engine fitted to the car, not whether it is a hatchback or estate. A breaker will focus on your engine code, fuel type, and model year rather than the body style. Provide your engine code from the V5 and the breaker can confirm whether a given part will suit your vehicle.
All Fabia engines — petrol and diesel — use an inlet manifold as a fundamental part of the engine's air intake system, so every Fabia variant will have one. The design and specification vary considerably between engine codes, particularly between naturally aspirated engines like the 1.2 HTP and turbocharged units like the 1.2 TSI, so always lead with your engine code when asking a breaker for a quote.