Compare prices on a used Škoda Fabia bonnet strut from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
The Škoda Fabia uses a bonnet strut (gas strut) to hold the bonnet open rather than a traditional prop rod, so yes, this is a genuine part on the car. It is fitted across all generations of the Fabia. If your strut has failed and the bonnet no longer stays up on its own, replacing the strut is the correct fix.
These two cars sit in different generations — the Mk1 Fabia ran from 1999 to 2007 and the Mk2 ran from 2007 to 2014 — so a 2008 strut is Mk2 and a 2013 strut is also Mk2, meaning they share the same platform and the strut should be compatible. However, the Mk2 received a facelift around 2010 which brought changes to the front end, so it is worth confirming with the breaker using your exact registration to be sure the mounting points and strut length are identical. Never assume fitment without the breaker verifying against your reg.
The Mk2 Fabia was facelifted around 2010, bringing updates to the lights, grille and bonnet pressing, which could affect whether the strut and its mounting points are identical across that boundary. You should confirm with the breaker whether the pre- and post-facelift Mk2 struts interchange, quoting your registration number so they can cross-reference accurately. This is one of those cases where the facelift boundary is the key question and we would not want to state interchangeability as fact.
Trim level does not affect bonnet strut fitment on the Fabia — the strut is determined by generation and facelift period, not by whether the car is an SE, Ambition, Monte Carlo, or vRS. All trims within the same generation share the same bonnet and strut setup. The only cosmetic difference you might notice is that struts from higher trims are identical mechanically, so there is nothing to watch out for there.
No — the Mk3 Fabia, which ran from 2014 onwards, is a different generation on a different platform and the bonnet and its supporting strut are not interchangeable with the Mk2 (2007–2014). Always source a strut that matches your generation, and confirm with the breaker using your registration to be certain of the correct part.
Engine type has no bearing on bonnet strut fitment for the Fabia — the bonnet and its strut are shared across petrol and diesel variants within the same generation. What matters is the generation (Mk1, Mk2, or Mk3) and whether your car is pre- or post-facelift. Give the breaker your registration and they can confirm the exact strut you need without any concern about engine choice.