Compare prices on a used Škoda Enyaq washer motor from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used washer motor that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Yes, the Enyaq has a windscreen washer motor (and a separate rear washer motor if your car has a rear wash-wipe) as part of its standard washer system, so this is a legitimate part to source from a breaker. The Enyaq is an electric vehicle with no combustion engine, but that has no bearing on washer system fitment — the pump runs off the 12V ancillary system just as on any other car.
The Enyaq launched in the UK in 2021 and received a facelift (the Enyaq Mk1 facelift) in 2024, so a 2021 and a 2024 car sit either side of a generation boundary. Whether the washer motor carried over unchanged across that facelift is something you should confirm with the breaker against your exact registration, as pump design and connector type can change at a refresh. If both cars are pre-facelift or both post-facelift, the chances of a match are much higher, but always ask the breaker to verify.
Trim level does not affect washer motor fitment — the pump is part of the washer system, not the drivetrain or interior spec, so an Enyaq 60, 80, 80x or vRS will use the same front washer motor if they share the same generation. The only meaningful distinction is front versus rear: if your car has a rear wash-wipe (fitted to most Enyaq variants), make sure you specify whether you need the front pump or the rear pump when contacting a breaker.
No — the drivetrain layout (single-motor RWD or dual-motor AWD) has no bearing on the washer pump whatsoever. The washer system is identical in design regardless of which motors propel the car, so you do not need to filter by drivetrain when asking a breaker for this part.
Yes, the front and rear washer motors are separate pumps and are not interchangeable with each other, even though they may look similar. When contacting a breaker, be clear about whether you need the front pump or the rear pump, and confirm the year of your car so they can match the correct part to your generation.
The Enyaq, VW ID.4 and Cupra Born (formerly el-Born) all share the Volkswagen Group MEB platform, which means many ancillary components are shared across the range. Cross-compatibility with MEB siblings is plausible for washer pumps, but connector types and pump specifications can still differ between brands and model years, so you should confirm the exact part number with the breaker before purchasing rather than assume it will fit.