Get quotes for a used or replacement Škoda Citigo lambda sensor. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used lambda sensor that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Yes, petrol-engined Citigos are fitted with lambda sensors — these are oxygen sensors in the exhaust that help the engine management system control the air-fuel mixture. The Citigo was sold in the UK as a petrol-only model, so every variant had at least one lambda sensor. Diesel or electric variants were not offered in the mainstream UK Citigo lineup, so if you have a standard UK petrol Citigo you can expect this part to exist on your car.
This is an important boundary to check: the Citigo ran from 2012 and received a facelift in 2017, and the engine range also straddled the Euro 5 to Euro 6 emissions transition during this period. Lambda sensors are emissions-era sensitive, and a sensor from the pre-facelift Euro 5 generation may not be the correct unit for a later Euro 6 car even if it looks physically similar. Give your registration and engine code to the breaker and ask them to confirm the emissions standard of the donor car before buying.
No — trim level does not affect lambda sensor fitment on the Citigo. Whether your car is a base S, SE, or SE L trim, what matters is the engine code and the emissions standard (Euro 5 or Euro 6), not the equipment level. You may notice cosmetic differences between donor cars at the breaker, but these have no bearing on whether the lambda sensor itself will be correct for your vehicle.
The Citigo, VW Up, and SEAT Mii do share the same basic MQB A0 small-car platform and engine family, so lambda sensors from these sister cars are widely regarded as interchangeable where the engine code and emissions era match. However, because the emissions calibration can vary between brands and model years, you should confirm the engine code and Euro standard of the donor vehicle with the breaker against your own registration before purchasing.
Yes, it matters: the upstream (pre-cat) sensor and downstream (post-cat) sensor are different parts with different part numbers, even on the same engine. Your OBD fault code or a diagnostic scan should tell you which sensor position has failed, and you should tell the breaker which position you need — upstream or downstream — along with your engine code. Fitting the wrong sensor for the position may resolve the warning light temporarily but will not correct the underlying reading the engine management system relies on.
Body style makes no difference to lambda sensor fitment — the sensor sits in the exhaust system and is determined entirely by the engine code and emissions era, not by how many doors the car has. Confirm the engine code and Euro standard match between donor and recipient car, and the body style of the breaker's vehicle is irrelevant to whether the part will fit yours.