Findapart

Second Hand Škoda Felicia Lambda Sensor

Get quotes for a used or replacement Škoda Felicia lambda sensor. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Felicia lambda sensor

No two lambda sensors are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Felicia parts

Used lambda sensor for other Škoda models

Fitment questions

Does my Škoda Felicia have a lambda sensor at all?

Yes, petrol-engined Felicias do have a lambda sensor — it sits in the exhaust system and feeds the engine management unit with oxygen data to control fuelling. However, the diesel-engined Felicia (the 1.9 SDI) does not use a lambda sensor, as diesel fuelling works differently and does not rely on this type of feedback. If you have a petrol Felicia and your engine management light is on, a faulty lambda sensor is a common cause and a used one from a breaker is a practical fix.

Will a lambda sensor from an early Felicia (pre-facelift) fit a later one?

The Felicia ran from 1994 through to 2001, with a facelift arriving in 1998 that brought some mechanical updates alongside the styling changes. The key fitment question is whether the engine code matches between the donor car and yours — the lambda sensor follows the engine specification, not the body style. Give the breaker your registration and engine code so they can cross-reference the correct sensor for your specific variant, as connectors and thread sizes can differ even across similar-looking engines.

Does the trim level affect which lambda sensor I need — does an LX need a different sensor to a GLX or Estate?

No, trim level makes no difference here — the lambda sensor is determined by the engine code and fuel type, not by whether the car is an LX, GLX, or any other specification. An Estate and a hatchback with the same engine code will use the same sensor. Focus your search on matching the engine code rather than the trim name, and tell the breaker both your registration and engine code to be sure.

Which petrol engine codes on the Felicia have a lambda sensor, and does it matter which one I have?

Yes, it does matter — the Felicia was available with several petrol engines including the 1.3 (engine code AEE and variants) and the 1.6 (engine code AEE or 1F-family units depending on market and year), and the lambda sensor specification can differ between them. Sensors from different engine codes may have different thread sizes, boss positions, or connector types and will not necessarily interchange. Always give the breaker your exact engine code (found on the engine block or your V5C) rather than just the displacement to ensure you get the right part.

Can I use a lambda sensor from a VW Polo or SEAT Ibiza of the same era on my Felicia?

The Felicia shared its platform and some running gear with the Volkswagen Polo Mk3 and SEAT Ibiza of the mid-to-late 1990s, and where the engine codes are identical the lambda sensor may well be the same unit. That said, confirming this cross-compatibility against your specific registration and engine code is something to route through the breaker rather than assume, as subtle differences in exhaust routing or sensor boss position can catch you out. A good breaker will be able to check parts books across the VAG family and tell you definitively.

My Felicia is showing an engine warning light — is the lambda sensor a common failure and is a used one worth fitting?

Yes, lambda sensor failure is a well-known issue on Felicias of this age and is a very common trigger for the engine management light, often accompanied by poor fuel economy or rough running. A good-quality used sensor from a low-mileage breaker car is a reasonable and cost-effective option given the age and value of these vehicles. Make sure the breaker can confirm the sensor came from a car with a matching engine code to yours, and have it fitted and the fault code cleared by a garage or competent DIYer to confirm the fix.