Need a used Škoda Karoq lambda sensor? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used lambda sensors vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
Yes, all petrol-engined Karoqs have lambda sensors (also called oxygen sensors), as these are essential for managing the air-fuel mixture on petrol engines. Diesel Karoqs do not use lambda sensors in the same way, so if your Karoq is a diesel, a lambda sensor is not the part you need. If you have a diesel and are chasing an emissions-related fault, the part you may actually be looking for is a NOx sensor, EGT (exhaust gas temperature) sensor, or DPF-related component — worth checking your fault code first.
The Karoq has been produced from 2017 onwards, with a facelift arriving in 2021, and engine fitment is the primary factor rather than the model year in isolation. What really matters is that the engine code matches, as different petrol engines (for example the 1.0 TSI and 1.5 TSI) use different sensors and may be positioned differently in the exhaust system. Crossing the 2021 facelift boundary is particularly worth querying with the breaker, as emission calibrations or wiring connectors may differ even on the same engine family.
No, you should not assume interchangeability between the 1.0 TSI and 1.5 TSI engines, as these are different engine families with different exhaust configurations and sensor specifications. Always match the engine code on the donor vehicle to your own — your engine code is on the VIN plate or in your service book, and the breaker can cross-reference it. Fitting the wrong sensor can cause running problems or a failed MOT, so confirm engine code compatibility with the breaker before buying.
Trim level makes no difference to lambda sensor fitment on the Karoq — the sensor is determined entirely by the engine code and emissions specification, not by whether you have S, SE, SE L, Sportline, or any other grade. You may find minor cosmetic differences in surrounding components when working on different trims, but the sensor itself will be the same across trims sharing the same engine. Focus your search on matching the engine code and model year rather than the trim name.
Petrol Karoqs typically have at least two lambda sensors — a pre-cat sensor (upstream, before the catalytic converter) and a post-cat sensor (downstream, after it) — and these are not interchangeable with each other. Your fault code or the position described by your garage will tell you which one you need, so make sure you tell the breaker whether you need the upstream or downstream sensor. The two sensors may look similar but have different calibrations and connector configurations, so specifying the correct position is important.
Lambda sensors do wear over time, so buying from a high-mileage donor vehicle carries more risk than buying from a lower-mileage one, though many used sensors from breakers perform perfectly well. The most important checks are that the engine code matches, the sensor shows no visible damage to the wiring or connector, and ideally that the donor vehicle's fault history is known. A reputable breaker should be able to tell you the donor vehicle's mileage and condition, and it's reasonable to ask before committing.