Findapart

Cheap Škoda Citigo Clutch

Need a used Škoda Citigo clutch? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Citigo clutch

Used clutchs vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Škoda Citigo parts

Used clutch for other Škoda models

Fitment questions

Does the Škoda Citigo have a clutch at all?

Yes, but only on manual gearbox variants — the Citigo was offered with either a five-speed manual gearbox or an automated manual (ASG, sometimes badged as 'Green Tech'), and both of these use a clutch assembly. Fully automatic transmission variants do not use a conventional friction clutch, so if your Citigo has a traditional automatic, a clutch is not the part you need. Check your V5 or a VIN check to confirm your gearbox type before searching.

Will a clutch from a 2012 Citigo fit my 2016 Citigo?

The Citigo ran as a single generation from 2011 through to around 2019, with a facelift arriving in 2017, so a 2012 and a 2016 car are both pre-facelift models. Clutch fitment follows the engine code above all else, so if both cars share the same engine code — most commonly the 1.0 MPI units such as CHY or CHYA — compatibility is very likely, but you should confirm this with the breaker against both registrations before buying.

Does the engine code really matter for a Citigo clutch, or is the year enough?

The engine code matters more than the year, because the Citigo's 1.0-litre MPI engine came in different states of tune with different codes, and the clutch specification can vary between them. You'll find the engine code on your V5 logbook or through a VIN check, and supplying it to the breaker is the single most useful thing you can do to get the right part. The year alone is not sufficient, especially if you're buying across a facelift boundary.

Does it matter whether I have the S, SE, or Elegance trim when buying a used Citigo clutch?

No — trim level makes no difference to clutch fitment on the Citigo, as S, SE, and Elegance are all cosmetic and equipment distinctions rather than mechanical ones. The clutch is determined by your engine code and gearbox type, both of which are shared across trim levels on otherwise identical drivetrains. You may simply receive a clutch kit with no trim-related differences whatsoever, which is exactly what you'd expect for a mechanical drivetrain component.

Can I use a clutch from a pre-facelift Citigo (pre-2017) on a post-facelift 2017-onwards car?

The 2017 facelift updated the Citigo's styling and equipment but did not fundamentally change the 1.0 MPI drivetrain, so clutch components may well interchange across that boundary. However, whether a specific used clutch from a pre-2017 car fits a post-2017 car is something you should confirm with the breaker against both registrations, as ancillary or mounting changes mid-production cannot be ruled out without checking. Supplying your engine code to the breaker is the best way to get a definitive answer.

Does the Citigo CNG (compressed natural gas) version use the same clutch as the petrol version?

The CNG Citigo used the same basic 1.0-litre engine architecture as the petrol variants, and the clutch assembly is generally shared, but the engine codes differ between fuel types and that difference is what determines the correct clutch spec. Always supply your exact engine code to the breaker rather than simply stating 'petrol' or 'CNG', as this removes any ambiguity. The breaker can then confirm compatibility against your registration before you commit to buying.