Cheap Peugeot Bipper EGR Valve
Compare prices on a used Peugeot Bipper egr valve from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Peugeot Bipper egr valve
A used egr valve that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State whether it's petrol or diesel
- State the engine code if known
Other used Peugeot Bipper parts
- Used Peugeot Bipper Catalytic Converter
- Used Peugeot Bipper DPF
- Used Peugeot Bipper Exhaust System
- Used Peugeot Bipper Lambda Sensor
- Used Peugeot Bipper Sump
- Used Peugeot Bipper Door
- Used Peugeot Bipper Quarter Panel
- Used Peugeot Bipper Alloy Wheels
- Used Peugeot Bipper Ignition Barrel
- Used Peugeot Bipper Propshaft
- Used Peugeot Bipper Towbar
- Used Peugeot Bipper Intercooler
Used egr valve for other Peugeot models
Fitment questions
Does the Peugeot Bipper actually have an EGR valve?
Yes, but only on diesel-engined Bippers — the 1.3 HDi and 1.4 HDi units both use an EGR valve as part of their emissions control system. Petrol-engined Bippers do not have an EGR valve at all. If you are unsure which engine your Bipper has, check your V5C or the plate under the bonnet before ordering.
Will an EGR valve from an early Bipper fit a later one — does the generation matter?
The Peugeot Bipper was sold in the UK as a single generation running from 2008 to around 2016, but emissions legislation changed during that period, with Euro 5 rules tightening from 2011. EGR valves from either side of that 2011 boundary may look similar but could differ internally to meet the different emissions standards. Name the boundary to your breaker and ask them to match the part to your exact engine code and registration year rather than assuming any Bipper EGR valve will do.
Does the engine code matter when buying a used Bipper EGR valve, or is one HDi the same as another?
Engine code is the single most important thing to match — even within the HDi diesel family, the 1.3 HDi and 1.4 HDi are different engines and their EGR valves are not interchangeable. Always give the breaker your full engine code (found on your V5C or stamped on the engine block) alongside your registration to make sure you get the right unit.
Does the trim level affect which EGR valve a Bipper needs — does an Entreprise or Tepee version need a different one?
No — trim level has no bearing on EGR valve fitment whatsoever. Whether your Bipper is a standard van, an Entreprise, or the Tepee people-carrier variant, what matters is the engine code and emissions era, not the trim or body style. You may find cosmetic differences around the engine bay between variants, but the EGR valve itself is determined by the engine, not the badge.
I have a 2012 Peugeot Bipper 1.3 HDi — will an EGR valve from a 2009 Bipper fit it?
A 2009 Bipper sits in the pre-Euro 5 period, while your 2012 Bipper should be to Euro 5 specification, so there is a meaningful emissions-era boundary between those two years. The parts may look identical but could differ in calibration or design to meet the stricter Euro 5 standards. Give both registration numbers and engine codes to the breaker and ask them to confirm the EGR valves are a genuine match before purchasing.
Can I use an EGR valve from a Citroën Nemo or Fiat Fiorino on my Peugeot Bipper?
The Bipper, Nemo, and Fiorino are all versions of the same platform and share the same PSA HDi engines, so cross-brand interchange is commonly discussed among owners. That said, emissions-era differences and subtle supplier variations mean fitment is not guaranteed just because the platforms are related. Confirm with the breaker that the part number and engine code match your specific registration before buying, as a mis-matched EGR valve could cause running problems or an MOT emissions failure.