Cheap Peugeot 408 Window Regulator

The Peugeot 408 was sold in the UK as a single generation running from 2010 to 2014, so regulators from any year within that range are the most likely to interchange, but you should still confirm the exact door side (NS or OS) with the breaker against your registration before buying.

Both years fall within the same 2010–2014 generation of the 408, so the regulator is likely compatible provided you match the correct side — NS (nearside, passenger) or OS (offside, driver). That said, ask the breaker to cross-reference your registration number to be certain, as minor running changes can occur mid-production.

Trim level — whether Access, Active, Allure or GT Line — does not affect window regulator fitment; the regulator is determined by the door position and side, not the specification level. You may find cosmetic differences in the door card or interior finish when fitting from a different trim, but the mechanical regulator itself is interchangeable across trims within the same generation. Confirm NS or OS with your breaker and you should be fine.

In UK convention, NS (nearside) is the passenger side on the left, and OS (offside) is the driver's side on the right — these are not interchangeable parts, so make sure you order the correct one. Double-check this before contacting a breaker, as returning a wrong-side regulator can be difficult once purchased.

Whether your 408 has electric or manual window operation does affect which regulator you need, but whether a specific trim or build year switches between the two can vary and is not always straightforward to confirm from spec sheets alone. Confirm with the breaker by quoting your registration so they can match the correct mechanism to your door.

The 408 and 308 are distinct models with different door structures, so their window regulators are not considered a direct interchange even though they share platform underpinnings. Always source a regulator listed specifically for the 408 and confirm the year and door side (NS or OS) with the breaker against your registration to ensure a correct fit.