Peugeot 207 Roof Panel Replacement Parts

The 207 ran as a single generation from 2006 to 2012, so you are working within one platform throughout, which is a good start. However, the roof panel depends heavily on body style — the 3-door hatch, 5-door hatch, and CC (cabriolet-coupé) all have different roof pressing shapes, so you must match body style exactly. A panel from the correct body style and door count within the 2006–2012 run is your starting point, but confirm the exact interchange with the breaker against your registration before ordering.

The 207 received a facelift in 2009, but this primarily affected front-end and interior components rather than the roof pressing itself. Because mid-generation pressing changes can occasionally occur without wide documentation, we would not state with certainty that every pre-2009 and post-2009 roof panel is identical — name the 2009 boundary as your reference point and confirm with the breaker against both registrations before committing.

Trim level does not affect the roof panel on the Peugeot 207 — the pressing is determined by body style and door count, not whether the car is S, XS, Envy, or GT. You may find cosmetic differences such as a different paint code or the presence of a sunroof aperture on some higher specifications, so check whether the donor panel has a sunroof opening if yours does not (or vice versa). As long as body style and door count match, trim level is not a barrier.

No — the 207 CC is a cabriolet-coupé with a folding hard top, and its roof structure is fundamentally different from the fixed-roof 3-door or 5-door hatchback. These are not interchangeable, and sourcing a CC roof panel requires finding another CC donor specifically. Always tell the breaker which exact body style you have so they can pull from the right vehicle.

The 207 SW (estate) and the van derivatives have different rooflines and longer, differently shaped roof panels compared to the 3-door or 5-door hatchback, so these do not interchange. For van variants specifically, roof height can also vary, adding another dimension that makes mixing with hatchback panels unreliable. Stick to a hatchback donor of the matching door count for a standard 207 hatch roof.

Your 2007 donor sits in the pre-facelift phase (2006–2009) and your 2011 car is post-facelift (2009–2012), so you are crossing the 2009 boundary. The platform is the same throughout the 207's run, and the roof is not typically a facelift-changed component, but because pressing changes within a generation are not always publicly documented, we cannot confirm this as guaranteed. Match the body style and door count first, then run both registrations past the breaker to verify the panels are from the same pressing before you buy.