Peugeot 2008 Bonnet Replacement Parts

The Peugeot 2008 runs across two generations: the first generation from 2013 to 2019, and the second generation from 2019 onwards. Bonnets are generation-specific, so a first-gen bonnet will not fit a second-gen car and vice versa. Within each generation, the bonnet is largely shared across the range, but you should confirm the exact part against your registration with the breaker.

The first-generation 2008 received a facelift in 2016, which brought changes to the front end including the grille and lights. The bonnet itself may or may not interchange across that 2016 facelift boundary, and this is something you must confirm with the breaker using your registration number rather than assume. Name the facelift year to the breaker so they can check whether the panel you need is pre- or post-2016.

A 2015 car is pre-facelift and a 2017 car sits after the 2016 facelift, so these are on opposite sides of the first-generation facelift boundary. Whether the bonnet physically interchanges across that boundary is not something we can confirm as fact, so check directly with the breaker quoting both registration numbers. Both cars are first-generation 2008s, so the panel will at least be from the correct generation.

No, trim level does not affect bonnet fitment on the 2008 — the same panel is used whether your car is an Access, Active, Allure, GT Line, or GT. You may notice cosmetic differences such as a different paint finish or condition on a part pulled from a different trim, but the panel itself will be the same shape and fitting. Simply match generation and facelift period rather than worrying about trim.

Engine type has no bearing on bonnet fitment for the 2008 — whether your car has a petrol or diesel engine, the front panel is the same within a given generation and facelift period. Focus on confirming the correct generation (first-gen 2013–2019 or second-gen 2019 onwards) and whether your car is pre- or post-2016 facelift if it is a first-gen model. Your registration number is the most reliable way for a breaker to match the exact part.

2019 is a transitional year for the 2008, as the second generation was introduced in late 2019 while first-generation cars were still being registered earlier in that year. You should check your exact registration plate with the breaker to confirm which generation your car is, because the two bonnets are completely different and will not interchange. Giving the breaker your full registration number is the safest way to make sure you get the right part.