Nissan Qashqai Steering Wheel Replacement Parts

Both years fall within the second-generation Qashqai (J11, 2014–2021), so the steering wheel is from the same platform generation, which is a good starting point. However, there was a facelift in 2017 that brought revised interior trim and controls, and steering wheels with integrated buttons can differ in connector layout between pre- and post-facelift cars. Name both registration plates to your breaker and ask them to confirm the switch and connector compatibility before buying.

No — the first-generation Qashqai (J10, 2006–2013) and the second-generation (J11, 2014–2021) are completely different platforms with different column designs, so the steering wheels are not interchangeable. Always source a wheel from the same generation as your car. Give your breaker your full registration to make sure they match the correct generation.

No — unlike brakes or suspension, the steering wheel on the Qashqai is not determined by engine size, so a 1.2, 1.5, 1.6, or 2.0-litre variant within the same generation will all use the same basic steering wheel fitment. The main variable is the generation (J10 or J11) and whether your car has a facelift-spec column. Confirm the exact year and any factory options such as audio or cruise-control buttons with your breaker.

Trim level alone does not affect whether a steering wheel physically fits; the mounting and column are the same across Acenta, N-Connecta, Tekna, and other trims within the same generation. What can differ between trims is the number and type of buttons integrated into the wheel — a Tekna wheel may have more controls than a basic Acenta wheel. Your existing steering column controls should still work, but confirm button layout and connector pins with your breaker so you end up with a wheel that matches your car's wiring.

The second-generation Qashqai (J11) ran from 2014 to 2021, when it was replaced by the third-generation J12. A facelift arrived in 2017, bringing styling and interior updates including changes to the steering wheel design and button arrangement on some variants. If your car is a 2017 or later J11, try to source a post-facelift wheel to keep connectors and controls consistent, and ask your breaker to verify against your registration.

The Qashqai+2 was a seven-seat, longer-wheelbase version of the first-generation J10 Qashqai, but the steering column and wheel design were shared with the standard J10 Qashqai, so a wheel from a Qashqai+2 should be the same fitment as one from a standard first-gen car. That said, always quote both vehicles' registrations to your breaker to double-check trim and button spec before committing to a purchase.