Findapart

Cheap Nissan NV200 Door Lock Mechanism

Get quotes for a used or replacement Nissan NV200 door lock mechanism. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Nissan NV200 door lock mechanism

Used door lock mechanisms vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Nissan NV200 parts

Used door lock mechanism for other Nissan models

Fitment questions

Will a door lock mechanism from an older NV200 fit my newer one – does the NV200 have any generations I need to worry about?

The Nissan NV200 was introduced in the UK around 2009 and received a facelift circa 2013, but the underlying bodyshell and door architecture remained largely consistent throughout its production run, so the generation boundary is less sharp than on many models. That said, pre- and post-facelift parts are not guaranteed to interchange, so always confirm the exact year of the donor vehicle with the breaker against your registration before buying.

Does it matter whether the lock mechanism comes from the sliding door or the hinged rear door on an NV200?

Yes, absolutely – the sliding side door and the hinged rear doors use completely different lock mechanisms and are not interchangeable. When sourcing a used part, make sure you specify whether you need the mechanism for the sliding side door or a hinged rear door, and if it is the sliding door, confirm the wheelbase of the donor van matches yours, as long-wheelbase variants can differ.

Does NS or OS matter when buying a used NV200 door lock mechanism?

Yes, side matters – the nearside (NS, passenger/left) and offside (OS, driver/right) door lock mechanisms are handed and will not swap between sides. Always tell the breaker clearly which side you need, using either NS/OS or left/right, to avoid receiving the wrong part.

Does trim level affect which door lock mechanism I need – for example, does it matter if my NV200 is a Tekna compared to a base SE?

For the door lock mechanism itself, trim level does not typically affect fitment – the door frame and latch architecture is the same across NV200 trim grades such as SE and Tekna. The main fitment variables are the door type (sliding vs hinged), the side (NS/OS), and the year of the donor vehicle, so focus on those when speaking to a breaker.

Will a door lock mechanism from a 2012 NV200 fit a 2015 facelift model?

The 2013 facelift is the key boundary here, so a 2012 (pre-facelift) mechanism crossing into a 2015 (post-facelift) van is not guaranteed to be a straight swap. Name both registration years clearly to the breaker and ask them to cross-reference the part numbers before you commit, as there may be subtle differences in the latch or actuator mounting even if the doors look similar.

Is the door lock mechanism on the NV200 the same as on the e-NV200 electric van?

The e-NV200 shares the same basic bodyshell as the standard NV200 and the door structure is broadly similar, so mechanisms can sometimes cross over, but this is not guaranteed given potential differences in wiring and actuator configuration on the electric model. Confirm with the breaker that the part number from the donor vehicle matches your specific registration before purchasing.