Nissan Micra Shock Absorber Replacement Parts
Get quotes for a used or replacement Nissan Micra shock absorber. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Buying a used Nissan Micra shock absorber: what matters
Fitment on a used shock absorber varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Also known as: shock.
- State whether it's front or rear
Other used Nissan Micra parts
- Used Nissan Micra ABS Pump
- Used Nissan Micra Steering Wheel
- Used Nissan Micra Brake Servo
- Used Nissan Micra Front Cross Member
- Used Nissan Micra Towbar
- Used Nissan Micra Battery
- Used Nissan Micra Propshaft
- Used Nissan Micra Seat Belt Pretensioner
- Used Nissan Micra Differential
- Used Nissan Micra Oil Cooler
- Used Nissan Micra Brake Light Switch
- Used Nissan Micra Central Locking Motor
Used shock absorber for other Nissan models
Fitment questions
Will a shock absorber from a 2003 Micra fit my 2007 Micra?
These are two different generations: the K11 ran from 1992 to 2003, while the K12 ran from 2003 to 2010, so a shock absorber from a 2003 or earlier K11 will not fit a 2007 K12. Stick to K12 donor cars for your 2007 model. Always confirm the exact part against your registration with the breaker before buying.
Does a shock absorber from a 2006 Micra fit a 2010 Micra?
Both years fall within the K12 generation (2003–2010), so there is a good chance of compatibility. However, the K12 received a facelift in 2007, and while suspension geometry was broadly carried over, you should confirm with the breaker that the specific unit matches your registration, particularly if your car has a larger 1.6-litre engine, as running gear can vary with engine weight.
Does engine size affect which shock absorber I need on a Nissan Micra?
Yes, engine size can influence shock absorber specification because heavier or more powerful engines sometimes require uprated damping to suit the different corner weights. On the K12 in particular, the 1.6-litre variant may differ from the standard 1.0 and 1.2 units, so always tell the breaker your exact engine size when requesting a quote.
Does it matter whether my Micra is an S, SE, or Acenta trim when buying a shock absorber?
Trim level does not affect shock absorber fitment on the Nissan Micra — S, SE, and Acenta are cosmetic and equipment grades rather than distinct suspension specifications. You may find minor cosmetic differences on the part such as paint markings, but the structural fitment is governed by generation and engine size, not trim. Confirm the specific unit with your breaker against your registration all the same.
Will a Micra K11 shock absorber fit a Micra K12?
No — the K11 (1992–2003) and K12 (2003–2010) are entirely separate generations with different suspension designs, so parts do not cross that boundary. Always source a shock absorber from a donor car in the same generation as yours, and confirm compatibility with the breaker using your registration number.
Do I need to specify which side when ordering a used Micra shock absorber?
Yes, absolutely — nearside (NS, passenger side) and offside (OS, driver side) shock absorbers are handed and will not swap between corners. Always tell the breaker which side you need, and double-check when the part arrives before attempting to fit it.