Findapart

Used Nissan Juke Steering Box

Need a used Nissan Juke steering box? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Nissan Juke steering box

A used steering box that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Nissan Juke parts

Used steering box for other Nissan models

Fitment questions

Does the Nissan Juke have a steering box?

No — the Nissan Juke uses an electric power-assisted rack-and-pinion steering system, not a steering box. A steering box is a recirculating-ball or worm-and-sector unit found on older or heavier vehicles; the Juke never had one fitted to any variant. If you need a steering component for your Juke, you are most likely looking for the steering rack (also called a steering rack and pinion assembly) instead.

What steering part should I be searching for on a Nissan Juke?

The correct part to search for is a steering rack or power steering rack — on the Juke this is an electrically assisted unit, so you may also see it listed as an EPS rack or electric steering rack. There is no hydraulic pump or steering box on any Juke variant, covering both the first generation (2010–2019) and second generation (2019-onwards). When getting quotes from a breaker, quote your registration so they can confirm the correct rack for your specific variant.

Does it matter which generation my Juke is when buying a used steering rack?

Yes, generation matters — the first-generation Juke ran from 2010 to 2019 (with a facelift around 2014), and the second-generation Juke launched in 2019 with a completely redesigned platform, so the steering racks between generations are not interchangeable. Even within the first generation, confirm with the breaker whether a pre-facelift (2010–2014) unit crosses over to a post-facelift (2014–2019) car, as changes can affect the part. Always check against your registration.

Does the trim level — for example Visia, Acenta, N-Connecta or Tekna — affect which steering rack I need?

No, trim level does not affect the steering rack fitment on the Nissan Juke — the rack is determined by the generation, not by whether the car is a Visia, Acenta, N-Connecta, or Tekna. You do not need to filter by trim when searching, though you should confirm the generation and engine with the breaker. Cosmetic or technology differences between trims have no bearing on the steering components.

Does the engine size affect which steering rack fits a Nissan Juke?

It is worth confirming with the breaker whether the steering rack differs between engine variants — for example between the 1.0-litre turbo and 1.6-litre units on the first generation, or the hybrid system on the second generation — as EPS rack calibration or mountings can occasionally vary. Engine size is less of a determining factor here than generation, but because the Juke's electric steering rack can carry software-related differences, always quote your registration to the breaker to be sure. Do not assume all racks within a generation are identical without checking.

Can I use a steering rack from a 2018 Juke on a 2020 Juke?

No — a 2018 Juke is a first-generation car, while a 2020 Juke is second-generation, and the two models use entirely different platforms, so the steering racks will not interchange. The second generation launched in 2019 with a new bodyshell and revised underpinnings, making it incompatible with first-generation parts. Always source a rack from the same generation as your car and confirm fitment with the breaker against your registration.