Cheap Nissan 350Z Anti Roll Bar
Need a used Nissan 350Z anti roll bar? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Nissan 350Z anti roll bar
A used anti roll bar that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State whether it's front or rear
Other used Nissan 350Z parts
- Used Nissan 350Z Brake Light Switch
- Used Nissan 350Z Wheel Bearing
- Used Nissan 350Z Handbrake Cable
- Used Nissan 350Z Steering Column
- Used Nissan 350Z Slam Panel
- Used Nissan 350Z Parking Sensor
- Used Nissan 350Z Door Lock Mechanism
- Used Nissan 350Z Front Panel
- Used Nissan 350Z Centre Console
- Used Nissan 350Z Bulkhead
- Used Nissan 350Z Bonnet Latch
- Used Nissan 350Z Window Winder Motor
Used anti roll bar for other Nissan models
Fitment questions
Does an anti roll bar from a 2003-2005 Nissan 350Z fit a 2006-2009 facelift model?
The 350Z ran from 2002 to 2009, with a facelift arriving for the 2006 model year that brought revised styling and some suspension geometry changes. Both generations do have front and rear anti roll bars, but whether the pre-facelift bar crosses over to the facelifted car is not guaranteed given potential geometry differences. Confirm the part against your registration with the breaker before buying.
Will a rear anti roll bar from any Nissan 350Z fit my car regardless of year?
All 350Z models are rear-wheel drive and were fitted with both front and rear anti roll bars throughout the production run from 2002 to 2009. However, the 2006 facelift is the key boundary to watch - bars from within the same generation are the most likely candidates for a straight swap. Always confirm the specific year and bar diameter with the breaker against your registration.
Does the trim level affect which anti roll bar I need on a Nissan 350Z?
Trim level alone does not determine which anti roll bar you need on the 350Z - the underlying running gear is not changed by trim designation. That said, if your car has had an aftermarket or uprated suspension setup fitted, the bar diameter or mounting points could differ from standard, so worth checking the bar dimensions match. Confirm with the breaker that the part matches your registration to be safe.
Does engine size matter when sourcing a used anti roll bar for a Nissan 350Z?
All UK-market 350Zs used the 3.5-litre VQ35DE naturally aspirated V6, so there is no engine size variation to worry about when sourcing an anti roll bar for this model. The main variable to watch is the model year relative to the 2006 facelift boundary. Confirm the year of the donor car with the breaker against your registration.
Do I need to specify front or rear when buying a 350Z anti roll bar from a breaker?
Yes - the 350Z has separate front and rear anti roll bars and they are not interchangeable with each other, so you must tell the breaker which end you need. Both are present on all 350Z variants throughout the 2002 to 2009 production run. Being clear about the year of your car and which end you need will help the breaker pull the right part quickly.
Is a Nissan 350Z anti roll bar the same as the one on a Nissan 370Z?
The 370Z replaced the 350Z from 2009 and uses a different platform, so the anti roll bars are not a like-for-like swap between the two models. If you are sourcing a used bar, stick to 350Z donor cars from the 2002 to 2009 range and specify whether you need the pre-facelift or post-2006 facelift version. Run the donor car's details past the breaker alongside your registration before committing to a purchase.