Cheap Mercedes-Benz MB100 Wheel Trims

Yes, the MB100 van was available with steel wheels and plastic wheel trims as a factory option or dealer fitment, so genuine used trims do exist for this model. However, many MB100s ran without trims or with aftermarket covers, so availability from breakers can be limited. If you are searching for these, it is worth specifying to the breaker whether you need a full set or individual trims.

The MB100 was produced from the mid-1980s through to the mid-1990s as a single broad generation, but there were running production changes over that period that could affect wheel size and fitment. Because of this, a trim from an early van may not clip securely onto a later wheel even if it looks similar. Always confirm the wheel diameter and clip pattern with the breaker against your specific registration before purchasing.

Engine size does not directly determine wheel trim fitment on the MB100 in the way it might affect brakes or suspension; the trim is governed primarily by the wheel diameter and the number and style of the retaining clips. That said, different spec or payload-rated variants could have been fitted with different wheel sizes at the factory, so check your existing wheel diameter before ordering. Confirm the exact wheel size and trim diameter with the breaker using your registration to be sure.

On the MB100, different GVW-rated variants could in principle have been fitted with different wheel specifications to suit their load rating, which would change the correct trim size needed. The quickest way to confirm your wheel size is to check the tyre sidewall on your van or the vehicle plate, rather than relying solely on the model name. Pass this information to the breaker so they can match a trim from an equivalent van.

Trim level does not affect wheel trim fitment on the MB100 provided the underlying wheel diameter and clip arrangement are the same; there were no meaningful trim-level names on this van in the way passenger cars often have. Cosmetically, trims sourced from different-spec vans may vary in design or logo detail, but functionally the fitment depends on the wheel, not the spec level. Check the diameter matches and confirm with the breaker before buying.

Provided the replacement trim is the same diameter and uses the same clip arrangement as the remaining trims on your van, mixing years can work in practice. However, because production changes occurred across the MB100's lifespan and trims from different periods may differ subtly in clip spacing or depth, there is a risk of a loose or insecure fit. Ask the breaker to compare the clip pattern and diameter against your registration details before committing to a purchase.