Hyundai Santa Fe Washer Motor Replacement Parts

The Santa Fe has run across several distinct generations in the UK: the first generation (SM) ran from 2001 to 2006, the second generation (CM) from 2006 to 2012, the third generation (DM) from 2012 to 2018 with a facelift around 2015, and the fourth generation (TM) from 2018 onwards. Washer motors are generally generation-specific, so a unit from within the same generation is your best starting point. Crossing a generation boundary — for example, using a CM unit on a DM — is unlikely to be a straight swap due to differences in connector types and pump design, so confirm compatibility against your registration with the breaker before buying.

Yes, the Hyundai Santa Fe is a five-door SUV fitted with both a front windscreen washer system and a rear tailgate washer system, and these typically use separate motors or a dual-outlet pump arrangement. When ordering, make sure you tell the breaker whether you need the front or rear washer motor, as they are not interchangeable with each other. Supplying your registration number will help the breaker pull the correct unit for your specific generation and build.

No — the washer motor on the Santa Fe is not affected by engine choice (whether diesel or petrol) or trim level (such as Classic, Premium, or Premium SE). The pump and motor assembly is common across the range within a generation regardless of those variables. Focus instead on confirming the correct generation and whether you need front or rear, then check the part number against your registration with the breaker to be sure.

The third-generation Santa Fe (DM) ran from 2012 to 2018 and received a facelift in 2015, but the facelift was primarily cosmetic rather than a structural engineering change to ancillary components like the washer motor. In many cases the washer motor will carry over within the same generation across the facelift, but connector pinouts and pump configurations can sometimes change, so this is one to confirm directly with the breaker against both registration numbers before purchasing.

Hyundai does share components across its model range, and there is a possibility that washer motor units from other Hyundai models of the same era could be compatible with the Santa Fe, but this is not something to assume without checking. Part numbers are the most reliable way to confirm a cross-model match, so give the breaker your Santa Fe's registration and ask them to compare part numbers with whatever donor vehicle they have available. Never fit a part on the basis of visual similarity alone.

Give them your full registration number so they can confirm the generation and build date, and tell them clearly whether you need the front or the rear washer motor. It also helps to let them know if your current motor is a single-outlet or dual-outlet type, or to share the part number from your existing unit if you can find it. The more detail you provide upfront, the less risk there is of receiving an incompatible part.