Get quotes for a used or replacement Hyundai i40 washer motor. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two washer motors are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Yes, the Hyundai i40 is fitted with a windscreen washer motor as standard across all variants, both saloon and tourer body styles, so you should have no trouble sourcing one from a breaker. The i40 was sold in the UK from 2011 to 2015 as a single generation, meaning the pool of available cars in breakers' yards is reasonably consistent. Most breakers will list it under front washer pump or washer bottle motor.
The Hyundai i40 ran as a single generation throughout its UK production life from 2011 to 2015, with a mild facelift introduced around 2014 that was primarily cosmetic. The washer motor and bottle assembly are not typically affected by facelift changes, so earlier and later units are likely compatible, but you should confirm the part numbers match against your registration with the breaker before buying. A good breaker will cross-reference this for you quickly.
The front washer motor on the i40 is housed in the washer bottle in the engine bay, and that component is generally shared across both the saloon and tourer body styles. However, rear washer pumps can differ because the tourer estate has a rear wash-wipe system while the saloon does not, so make sure you specify front or rear when requesting a quote. Always confirm with the breaker against your registration to be certain.
Engine size does not affect washer motor fitment on the i40 — the same pump design is used regardless of whether your car has a petrol or diesel engine. UK trim levels such as Classic, Active, Style, and Premium are also irrelevant to washer motor compatibility, as this is a functional mechanical part rather than a trim-specific item. Focus instead on whether you need the front or rear pump, and confirm the part with the breaker using your registration.
It is possible that Hyundai shared washer pump components across models from the same era, as is common across the manufacturer's range, but this is not something to assume without checking. Give the breaker your i40's registration and ask them to cross-reference any donor part's number against the correct i40 fitment. Never assume a part from a different model is a straight swap without that confirmation.
On the i40 tourer, the rear washer pump is typically a separate motor to the front one, often clipped onto the same washer bottle or mounted separately, and the two are not usually interchangeable with each other. When sourcing a replacement, be clear with the breaker whether you need the front pump or the rear pump, as both may be listed under 'washer motor' and they are different parts. Confirm the correct unit against your registration before purchasing.