Cheap Hyundai ix35 Transfer Box
Get quotes for a used or replacement Hyundai ix35 transfer box. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Hyundai ix35 transfer box
No two transfer boxs are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State whether it's manual or automatic
Other used Hyundai ix35 parts
- Used Hyundai ix35 Gearbox Mount
- Used Hyundai ix35 Fuel Injector
- Used Hyundai ix35 Water Pump
- Used Hyundai ix35 Air Conditioning Condenser
- Used Hyundai ix35 Rear Tailgate
- Used Hyundai ix35 Heater Matrix
- Used Hyundai ix35 Headrest
- Used Hyundai ix35 Rear Bumper
- Used Hyundai ix35 Air Flow Meter
- Used Hyundai ix35 Rear Panel
- Used Hyundai ix35 Camshaft
- Used Hyundai ix35 Subframe
Used transfer box for other Hyundai models
Fitment questions
Does the Hyundai ix35 have a transfer box?
Only certain ix35 variants were fitted with a transfer box — specifically those with four-wheel drive (4WD). Front-wheel-drive ix35 models never had a transfer box at all, so if your car is FWD you will not find this part on your vehicle. Check your V5 or run a VIN check to confirm whether your ix35 is 4WD before searching for this part.
Which Hyundai ix35 engines came with 4WD and therefore have a transfer box?
The 4WD transfer box was available on ix35 models fitted with the 2.0-litre petrol and the 2.0-litre diesel (engine code D4HA) — the smaller 1.6-litre petrol was front-wheel drive only and never received a transfer box. Your engine code, found on the V5 or via a VIN check, is the most reliable way to confirm which drivetrain your car has. If your engine code is D4HA and your car is specified as 4WD, you are in the right place for this part.
Will a transfer box from an early ix35 (2010–2013) fit a facelifted ix35 (2013–2015)?
The Hyundai ix35 ran from 2010 to 2015 in the UK, with a facelift arriving around 2013, and on paper the 4WD drivetrain carried across both phases of production. However, whether a transfer box from a pre-facelift car crosses cleanly to a post-facelift car is something you should confirm with the breaker against your exact registration and engine code, as ancillary or mounting changes can occur mid-production without obvious external signs. Give the breaker your engine code and full registration to get the most accurate answer.
Does the trim level affect which transfer box I need — for example, does a Classic need a different unit to a Premium or Style?
Trim level — whether Classic, Premium, or Style — has no bearing on which transfer box fits your ix35; what matters is your engine code, fuel type (petrol or diesel), gearbox type (manual or automatic), and whether the car is 4WD. A transfer box from a Classic 4WD D4HA diesel is mechanically the same unit as one from a Premium or Style with identical specifications. Focus your search on matching those mechanical details rather than the trim badge.
Does the gearbox type matter when sourcing a used ix35 transfer box?
Yes — the ix35 4WD was offered with both manual and automatic gearboxes, and the transfer box interfaces directly with the gearbox, so you must match the gearbox type of the donor car to your own. Fitting a transfer box from an automatic-gearbox car to a manual-gearbox ix35 (or vice versa) will not work. Always tell the breaker your gearbox type alongside your engine code and registration to ensure the unit is compatible.
Will an ix35 transfer box need coding or programming after fitting?
Whether the transfer box requires any ECU pairing or electronic calibration after fitting is something you should confirm directly with the breaker or a specialist before purchasing, as this can vary and is not something that can be stated as a blanket rule. It is worth raising this question before you buy rather than after, so you are not caught out by unexpected workshop costs. A good breaker will be able to advise based on the specific unit they are supplying.