Get quotes for a used or replacement Hyundai ix35 quarter panel. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used quarter panels vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Hyundai ix35 ran from 2010 to 2015 as a single generation, with a facelift arriving in 2013 that brought revised front and rear styling changes. For a quarter panel, the 2013 facelift is the key boundary to be aware of, as pressing changes around that point can affect whether a panel lines up correctly. Always confirm with the breaker whether the donor vehicle is pre- or post-facelift before proceeding.
Your 2011 car is pre-facelift and your 2014 is post-facelift, which means they sit either side of the 2013 facelift boundary — a significant point for a body panel like a quarter. Whether the pressing is identical or subtly different across that cut-off is not something we can confirm as fact here. Give the breaker your registration and the donor vehicle's registration so they can compare the two before you buy.
Trim level does not affect quarter panel fitment on the ix35 — the S, SE, Premium, and other trim variants all share the same body pressing. What can differ cosmetically is whether the donor car had body-coloured versus unpainted mouldings or side protection strips, so check the panel matches your car's spec in that respect. The breaker can advise on those cosmetic details when you get your quote.
Yes — quarter panels are side-specific, so an NS (passenger side) panel will not fit the OS (driver side) position, and vice versa. Make sure you tell the breaker clearly which side you need when requesting a quote. Getting this wrong is one of the most common ordering mistakes with body panels.
The ix35 and the first-generation Tucson (JM, 2004–2010) are different generations on different platforms, so their quarter panels are not the same. The ix35 is sometimes referred to informally as the second-generation Tucson in some markets, which can cause confusion when searching for parts. If you come across a panel listed under a different nameplate, confirm with the breaker against your exact registration before purchasing.
Engine type and drivetrain make no difference to quarter panel fitment on the ix35 — the body shell pressing is the same regardless of what is under the bonnet. You can safely take a panel from a 1.6 petrol car for a 2.0 diesel, or from a 2WD for a 4WD, without any fitment concern on that basis. Focus your checks on the model year relative to the 2013 facelift and the correct side (NS or OS) instead.