Cheap Hyundai i10 Bumper
Compare prices on a used Hyundai i10 bumper from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Hyundai i10 bumper
Used bumpers vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's a front or rear bumper
Other used Hyundai i10 parts
- Used Hyundai i10 Bonnet
- Used Hyundai i10 Front Bumper
- Used Hyundai i10 Wing
- Used Hyundai i10 Spoiler
- Used Hyundai i10 Propshaft
- Used Hyundai i10 Brake Servo
- Used Hyundai i10 Engine
- Used Hyundai i10 Differential
- Used Hyundai i10 Radio
- Used Hyundai i10 Fuel Injection Pump
- Used Hyundai i10 Indicator Light
- Used Hyundai i10 Airbag
Used bumper for other Hyundai models
Fitment questions
What years does the Hyundai i10 bumper fit – how are the generations split?
The i10 runs across three main generations in the UK: the first generation (BA) covered roughly 2008 to 2013, the second generation (IA) ran from 2014 to 2019 with a facelift around 2016–2017, and the third generation (AC3) arrived in 2020 and is still current. Bumpers are not interchangeable between these generations, so always make sure the breaker's part comes from the same generation as your car. Quoting your registration to the breaker is the quickest way to confirm this.
Will a bumper from a 2015 i10 fit my 2018 i10?
Both a 2015 and a 2018 i10 fall within the second-generation (IA) range, which ran from 2014 to 2019, but this generation received a facelift around 2016–2017 that changed the front-end styling including the bumper, grille and lights. A 2015 car sits pre-facelift and a 2018 car is post-facelift, so the bumpers may look different and may not interchange correctly – confirm with the breaker against both registrations before buying.
Does trim level affect which bumper I need – for example, does a Classic fit differently to a Premium or SE?
Trim level does not affect bumper fitment on the i10; the shell and mounting points are the same across Classic, SE, Premium and other trim grades within a generation. However, some trims may have different fog-light cut-outs or sensor hole patterns, so describe your existing bumper's specification to the breaker so they can match those details. The breaker can check against your registration to make sure the used part has the right apertures for your car.
Can I use a bumper from a 2013 i10 on a 2014 i10?
A 2013 i10 is first-generation (BA) and a 2014 i10 is second-generation (IA) – these are entirely different platforms and the bumpers are not compatible. Always buy within the same generation to have any chance of a straight fit.
Does the colour of a used i10 bumper matter when buying from a breaker?
Used bumpers from breakers are typically supplied in the car's original paint colour, so an exact colour match for a straight swap onto a visible panel is unlikely unless you get lucky. Most buyers either have the used bumper resprayed to match or use the purchase as an opportunity to repair and repaint their existing one. Let the breaker know your colour code (found on the VIN plate) so they can at least flag if they have a close match.
Will an i10 bumper from any engine variant fit my car – for example, does a 1.0 bumper fit a 1.2?
Engine choice makes no difference to bumper fitment on the i10; the front-end panels are shared across all engine options within a generation and facelift period. You can safely ignore the engine size when searching for a used bumper, and focus instead on making sure the generation and facelift period match your car. Confirm the part against your registration with the breaker before purchasing.