Hyundai Accent Ignition Switch Replacement Parts

All generations of the Hyundai Accent sold in the UK used a conventional keyed ignition switch rather than a push-button start system, so yes, the part does exist on this model. The ignition switch is mounted on the steering column and operates the starter circuit and electrical accessories. If your Accent uses a key to start, a used ignition switch from a breaker is a legitimate repair option.

The Hyundai Accent ran in two distinct generations relevant to UK buyers: the second generation covered roughly 2000–2005, and the third generation covered approximately 2006–2010. The steering column design and electrical connector layouts changed between these generations, so a switch from the earlier car is very unlikely to be a straight swap into the later one. You should confirm with the breaker that the part number or generation matches your own registration before purchasing.

Engine size does not determine which ignition switch fits your Accent — the switch is part of the steering column assembly and is the same across petrol engine variants within the same generation. Whether your car is a 1.3, 1.4, or 1.6 petrol, the relevant factor is the model generation and year, not the engine. Tell the breaker your registration and year so they can match the correct generation rather than worrying about engine code.

Trim level does not affect ignition switch fitment on the Hyundai Accent — the switch itself is the same mechanical and electrical component regardless of whether the car is a base, Si, or GSi trim. You may find that higher-spec cars have additional functions wired through the ignition barrel such as immobiliser or alarm integration, so confirm with the breaker that any electronic or immobiliser elements match your setup. The physical switch should interchange within the same generation across all trim levels.

It is possible that some Hyundai models of the same era share steering column components, but this is not something that can be confirmed without checking part numbers directly. The Getz and Accent were built on different platforms and the column assemblies are not guaranteed to be interchangeable. Ask the breaker to cross-reference the part number against your Accent's registration to see whether a switch from another Hyundai model will physically and electrically match.

Make sure the breaker confirms the part comes from the same generation Accent as yours, since the connector type and electrical functions can differ between the second-generation (roughly 2000–2005) and third-generation (roughly 2006–2010) cars. Check whether your car has an immobiliser transponder in the barrel, as this may need to be paired or transferred separately — a breaker can usually advise on this. Providing your full registration to the breaker is the most reliable way to ensure you receive the correct switch.