Findapart

Second Hand Ford Sierra Handbrake Cable

Need a used Ford Sierra handbrake cable? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Ford Sierra handbrake cable

Used handbrake cables vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Ford Sierra parts

Used handbrake cable for other Ford models

Fitment questions

Will a handbrake cable from a different year Ford Sierra fit mine?

The Ford Sierra ran from 1982 to 1993 and went through two main generations: the original Sierra (1982–1987) and the facelifted Sierra (1987–1993), which brought enough changes to running gear that you should not assume cables cross over between those two periods without checking. Within the same generation, year-to-year fitment is generally consistent, but if your car sits close to the 1987 boundary, confirm with the breaker against your exact registration before ordering.

Does the Sierra's engine size affect which handbrake cable I need?

It can do, because larger-engined Sierras were typically fitted with bigger rear brakes to cope with the extra power, and the handbrake cable is matched to those brakes. A 2.0 or 2.3 Sierra may well use a different cable to a 1.3 or 1.6 car, so always tell the breaker your engine size alongside your year when asking for a quote.

I have a Sierra XR4i – is the handbrake cable the same as on a base L or GL model?

The XR4i used a larger rear brake setup suited to its 2.8 V6 engine, so the handbrake cable is likely to differ from that on a smaller-engined L or GL Sierra despite sharing the same bodyshell. Trim level alone does not affect fitment, but engine size does, so quote your engine as well as the trim name when speaking to a breaker.

Is there actually a handbrake cable on the Ford Sierra, or does it use a different parking brake system?

Yes, the Ford Sierra is a rear-wheel-drive car with a conventional drum or disc rear brake setup, and it uses a standard mechanical handbrake cable to apply the rear brakes – there is no electronic parking brake or unusual alternative system on this model. This is a straightforward part to source from a dismantler.

Will a handbrake cable from a pre-facelift Sierra (pre-1987) fit a late facelift car (1987–1993)?

The 1987 facelift updated various components on the Sierra, and while the basic cable principle is the same, you cannot assume a pre-1987 cable is a direct swap onto a post-1987 car or vice versa. Name the generation boundary clearly when you contact a breaker and ask them to check the cable against your specific registration to be sure.

Does it matter whether I have a Sierra saloon, hatchback, or estate when buying a handbrake cable?

The body style itself does not change the rear brake or handbrake cable setup, so a cable from a hatchback donor car should correspond to one from a saloon or estate of the same engine size and generation. What matters for fitment is the generation, engine size, and year – not the body style – so focus on those details when getting a quote from a breaker.