Second Hand Ford Ka Handbrake Cable
Get quotes for a used or replacement Ford Ka handbrake cable. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Ford Ka handbrake cable
Used handbrake cables vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's left or right
Other used Ford Ka parts
Used handbrake cable for other Ford models
Fitment questions
Does the Ford Ka actually have a handbrake cable?
Yes, the Ford Ka uses a traditional mechanical handbrake operated by cables running to the rear drum brakes, so a handbrake cable is a genuine part on this model. This applies across both the Mk1 Ka (1996–2008) and the Mk2 Ka (2008–2016), both of which used rear drum brakes with cable-operated parking brakes. If you have been told otherwise, double-check you are not confusing it with a different vehicle.
Will a handbrake cable from a Mk1 Ka (1996–2008) fit a Mk2 Ka (2008 onwards)?
No — the Mk1 Ka (1996–2008) and the Mk2 Ka (2008–2016) are completely different platforms, with the Mk2 based on the Fiat 500 architecture, so the handbrake cables are not interchangeable between generations. Always source a cable specific to your generation and confirm the year of your vehicle with the breaker. Never assume a Mk1 part will cross over to a Mk2.
Does engine size affect which handbrake cable I need on a Ford Ka?
For the Ford Ka, engine size does not meaningfully affect handbrake cable fitment because all variants used the same rear drum brake arrangement regardless of whether you have the 1.0, 1.2, or 1.3 engine. The cable is determined by generation and overall rear brake setup rather than power output. Confirm the year and generation with your breaker and you should be pointed to the right part.
Does the trim level — for example Studio, Style, or Zetec — change which handbrake cable I need?
No, trim level does not affect handbrake cable fitment on the Ford Ka — Studio, Style, and Zetec variants all share the same rear drum brake and cable setup within the same generation. You may find cosmetic differences between donor cars from different trims, but the cable itself is the same part. Just confirm the generation and year with your breaker rather than worrying about trim.
My Ka is a 2007 — could a cable from a 2008 Ka fit it?
This is a boundary worth being careful about, because 2008 is the changeover year between the Mk1 Ka (1996–2008) and the Mk2 Ka (2008–2016), and the two generations are not platform-compatible. A 2007 Ka is definitively Mk1, but an early 2008 car could be either generation depending on when it was registered. Confirm which generation your car is before ordering, and check the part against your registration with the breaker before buying.
Can I use a nearside (NS) cable from a breaker if I only need the offside (OS), or are they the same part?
On the Ford Ka, the two rear handbrake cables — nearside and offside — may differ in length or routing depending on the layout, so it is worth confirming with your breaker whether the NS and OS cables are the same part number for your specific year. Do not assume they are interchangeable without checking, as fitting the wrong side could affect brake balance or cable reach. Ask the breaker to match against your registration to be sure.