Ford Fiesta Brake Caliper Replacement Parts

This crosses a generation boundary: the Mk7 Fiesta ran from 2008 to 2017, with a facelift in 2013, so both years sit within the same generation, but whether the caliper itself interchanges across the 2013 facelift is something you should confirm with the breaker against your exact registration. Engine size also matters here, as larger-engined Fiestas were often fitted with bigger brakes than smaller-engined ones, so make sure the donor car matches your engine as well. Never assume fitment without the breaker checking both vehicles.

The Mk6 Fiesta ran from 2002 to 2008 and the Mk7 from 2008 to 2017, so these are different generations and the calipers are very unlikely to be interchangeable. Running gear design changed significantly between these two generations, and attempting to fit a Mk6 caliper to a Mk7 (or vice versa) would need to be verified by a breaker against both registrations before any purchase. Do not assume compatibility across this generational boundary.

For standard trim levels like Zetec and Titanium, trim itself does not affect brake caliper fitment — what matters is the engine size and the generation of the car, not the trim badge. You may find cosmetic differences such as caliper colour between some variants, but the underlying part is determined by the mechanical specification. Confirm the engine size matches between donor and recipient vehicles and ask your breaker to check against your registration to be certain.

Yes, absolutely — brake calipers are side-specific, so you must tell the breaker whether you need the nearside (NS, the kerb/left side) or the offside (OS, the driver's/right side) caliper. Supplying the wrong side is a very common and easily avoided mistake, so double-check which corner needs replacing before contacting a breaker. Front and rear calipers are also different parts, so specify that too.

Engine size is one of the key factors affecting brake caliper fitment on the Fiesta, and a 1.0 EcoBoost model may well carry smaller brakes than a 1.6-engined car because larger or more powerful engines tend to require greater braking capacity. You should not assume these calipers are interchangeable just because the cars look the same or share a generation. Ask the breaker to match the caliper to your exact registration rather than just the model name.

The Mk8 Fiesta launched in 2017, and the ST performance variant is known to have different braking hardware from standard models in that generation, reflecting its higher performance demands. Whether a caliper from a standard Mk8 Fiesta fits an ST is not something that can be stated as a straightforward yes or no — confirm this with the breaker against both registrations. Running gear on performance trims often differs in ways that aren't obvious from the outside, so treat this as a case where specialist verification is essential.