Ford Fiesta Bonnet Strut Replacement Parts

Most Ford Fiesta generations use a simple metal prop rod to hold the bonnet open rather than gas struts, so a 'bonnet strut' as a hydraulic or gas-pressurised support does not exist as standard on the majority of Fiesta variants. If your bonnet is not staying up, you are most likely looking for the bonnet prop rod and its retaining clip, or possibly the bonnet hinge if there is a different issue. Check under your bonnet to confirm whether your car has a rod sitting in a holder or a gas strut mechanism before ordering any parts.

On the vast majority of Ford Fiesta models sold in the UK, the bonnet is held open by a metal prop rod that slots into a hole in the bonnet or body - this is the part you should be searching for, listed as a bonnet stay or bonnet prop rod. If the rod itself is missing, bent, or the retaining clip has broken, that is the part to quote for from a breaker. Search Findapart for 'Ford Fiesta bonnet stay' or 'bonnet prop rod' to get quotes from dismantlers who can match it to your exact vehicle.

The Mk6 and Mk7 Fiesta are different generations with different bonnet profiles, hinge positions and panel dimensions, so the bonnet prop rod is unlikely to be a straight swap between them. Even within the Mk7, there was a facelift around 2013 that brought changes to the front-end panels, and you should confirm with the breaker whether the rod from either side of that facelift suits your car. Always give the breaker your registration number so they can verify the correct part against their stock.

For a basic bonnet prop rod, the trim level does not affect fitment - the bonnet and its supporting mechanism are shared across trim levels within the same generation and facelift period. You may find minor cosmetic differences such as coatings or clips depending on the donor car, but these do not affect function. Focus on matching the generation and facelift year rather than the trim name when sourcing from a breaker.

Yes, the bonnet and its prop rod are part of the front-end structure, which is shared between 3-door and 5-door Fiesta variants within the same generation - the number of doors does not affect this part. What matters is that you match the correct generation and facelift period, as bonnet dimensions can differ across those boundaries. Confirm with your breaker using your registration to be certain.

The Mk7 Fiesta ran from 2008 to 2017, but there was a notable facelift around 2013 which updated the front-end panels including the bonnet, so a 2012 and a 2015 car sit on opposite sides of that facelift boundary. Whether the bonnet prop rod itself interchanges across that facelift is something you should confirm with the breaker against your registration, as panel and hinge geometry can vary. Give the dismantler your reg and they will be able to check their parts against your specific car.