Used Fiat Talento Wheel Hub

The Fiat Talento ran as a single generation from 2016 to 2021, based on the Renault Trafic platform, so there are no distinct sub-generations or facelifts to worry about when sourcing a hub for this model. All Talantos share the same basic platform across that production window, which is helpful when looking at used parts. That said, engine size and payload/GVW rating can influence brake and hub specifications, so always confirm those details with the breaker against your registration plate.

Both the 2017 and 2020 Talento sit within the same single generation (2016–2021) with no known mid-generation platform change, so there is a reasonable chance of compatibility. However, hubs can vary depending on engine size and the van's payload or GVW rating, which affects brake and hub sizing. Confirm the engine variant and GVW from both vehicles with the breaker before buying to make sure you get the right part.

Yes, engine size can matter because larger or higher-output engines are often paired with bigger brakes, and the hub is matched to the brake assembly. On the Talento, the 1.6 and 2.0 MultiJet diesel variants may carry different hub and bearing specifications front or rear. Always tell the breaker your exact engine and check the part against your registration to be sure.

It can do, yes — on panel vans like the Talento, higher payload-rated variants sometimes run heavier-duty running gear including different hub assemblies to handle the additional load. The GVW rating is shown on the vehicle identification plate inside the door shut, and this is a more reliable guide than just the model name or load description. Give the breaker your GVW figure alongside your registration so they can match the correct hub specification.

For the front axle in particular, hubs are handed — the nearside (NS, left) and offside (OS, right) units are mirror images of each other and are not interchangeable. Always specify NS or OS clearly when contacting a breaker, and double-check which side is faulty before ordering to avoid the cost of return shipping. Rear hubs may be symmetrical on some configurations, but confirm this with the breaker rather than assuming.

Trim level alone does not affect wheel hub fitment on the Talento — hubs are determined by the platform, engine, and GVW rating, not by interior or exterior specification. So a hub from an SX-trim van can in principle suit an LX-trim van of the same engine and payload rating. Do be aware that alloy wheel sizes may differ between trim levels, which won't affect the hub itself but is worth noting when checking the overall brake and suspension setup with your breaker.