Fiat Fullback Wheel Hub Replacement Parts

The Fiat Fullback was sold in the UK from 2016 to 2020, and as a single-generation model based on the Mitsubishi L200 fourth-generation platform it shares a common basic architecture throughout that run. However, there was a facelift in 2019 that brought minor updates, and whether the hub assembly crosses cleanly between pre-facelift and post-facelift vehicles is something you should confirm with the breaker against your registration before ordering.

The 2019 model year sits at the facelift boundary for the Fullback, so a 2017 pre-facelift hub and a 2019 post-facelift hub may or may not be directly interchangeable depending on whether any running-gear revisions were made at that point. Name the boundary confidently to your breaker — 2016–2018 pre-facelift versus 2019–2020 facelift — and ask them to check the part number against your registration plate to confirm before purchasing.

Yes, engine choice can matter because larger or more powerful engines are often paired with uprated brakes, and the hub must match the brake assembly fitted to your vehicle. The Fullback was offered with 2.4-litre diesel variants alongside the more common 2.4 in different states of tune, so give the breaker your exact engine specification as well as your registration so they can verify the correct hub for your setup.

Trim level alone — LX versus LX+ on the Fullback — does not affect wheel hub fitment, as the running gear is determined by engine and axle specification rather than interior or cosmetic specification. You may find that a hub sourced from a different trim has different paint or surface finish, but that has no bearing on whether it will fit and function correctly on your vehicle.

The Fiat Fullback shares its platform with the Mitsubishi L200 of the same generation, so there is a strong basis for compatibility, but part numbers and any Fiat-specific revisions mean you should not assume they are identical without checking. Ask the breaker to cross-reference both part numbers against your Fullback's registration before committing to a purchase.

Yes, nearside (NS, passenger side) and offside (OS, driver side) hubs are handed on most vehicles due to the ABS sensor position and bearing orientation, so always specify the correct side when contacting a breaker. Fitting the wrong side can cause ABS faults or bearing failure, so double-check which corner needs replacing before you get quotes.