Second Hand Vauxhall Agila ABS Pump
Need a used Vauxhall Agila abs pump? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Vauxhall Agila abs pump
Used abs pumps vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State if it's 2WD or 4WD
Other used Vauxhall Agila parts
- Used Vauxhall Agila Steering Wheel
- Used Vauxhall Agila Axle
- Used Vauxhall Agila Wheel Hub
- Used Vauxhall Agila Brake
- Used Vauxhall Agila Rear Cross Member
- Used Vauxhall Agila Ignition Switch
- Used Vauxhall Agila Brake Master Cylinder
- Used Vauxhall Agila Exhaust System
- Used Vauxhall Agila Washer Pump
- Used Vauxhall Agila Alloy Wheels
- Used Vauxhall Agila Seat Belt
- Used Vauxhall Agila CV Joints
Used abs pump for other Vauxhall models
Fitment questions
Does the Vauxhall Agila actually have an ABS pump?
Yes, ABS was available on the Agila, though it was not standard across all trim levels and years — on some lower-spec variants it was an optional extra rather than fitted as standard. If your car has the ABS warning light on the dashboard and ABS reluctor rings on the hubs, it has the system and therefore an ABS pump. Check your V5 or ask a breaker to run your registration before ordering.
Will an ABS pump from a 2000–2004 Agila (Mk1) fit my 2004–2008 Agila (Mk2)?
The Agila ran in two distinct generations: the Mk1 from 2000 to 2004, and the Mk2 from 2004 to 2008, which was a substantially different car sharing its platform with the Suzuki Swift rather than the Mk1's Corsa-derived base. These two generations used different underpinnings, so the ABS pump and hydraulic unit are not expected to be interchangeable. Always confirm against your registration with the breaker before purchasing.
Does engine size affect which ABS pump I need for my Agila?
On the Agila, the braking system differences between engine variants are modest, but larger-engined cars can carry uprated brake hardware, which may mean the ABS pump and modulator unit differs from the base 1.0 to the 1.2 or 1.4 variants. It is safest to match the replacement pump to your exact engine size rather than assuming all Agilas use the same unit. Confirm the part number with the breaker against your registration to be sure.
Does it matter whether my Agila is an Enjoy, Design, or Club trim when buying an ABS pump?
Trim level does not affect ABS pump fitment on the Agila — the pump is part of the running gear, not a cosmetic or interior feature. What matters is your generation (Mk1 2000–2004 or Mk2 2004–2008) and your engine size. Quote your registration to the breaker and they will match on the mechanically relevant details rather than the trim badge.
My Agila is a 2004 — is it a Mk1 or Mk2, and does that change which ABS pump I need?
2004 was the changeover year between the Mk1 and Mk2 Agila, so cars registered in that year could be either generation depending on the exact build and registration date. This distinction genuinely matters for the ABS pump because the two generations used different platforms and brake systems. Give the breaker your full registration so they can confirm which generation your car is before sourcing the part.
Can I fit an ABS pump from an Agila that didn't have ABS as standard?
If the donor car was not fitted with ABS from the factory, it will not have an ABS pump to remove — the entire hydraulic modulator unit, wiring, and wheel speed sensors are absent on non-ABS cars. You need a pump sourced from a like-for-like Agila that was factory-fitted with ABS, ideally matching your generation and engine size. Ask the breaker to confirm the donor vehicle had ABS as standard before they strip it.