Vauxhall Combo ABS Pump Replacement Parts

ABS was not standard on early Vauxhall Combos and was introduced as the model range developed, so not every example will have an ABS pump fitted. If your Combo is a later B-series (2001–2011) or C-series (2012–2018) van, it is far more likely to have ABS as standard, but earlier A-series vans from the 1990s may simply not have the system at all. Check your dashboard warning lights and under the bonnet near the brake master cylinder before ordering — if there is no ABS modulator block present, you do not need this part.

Both years fall within the B-series Combo generation (2001–2011), so there is a reasonable chance of compatibility, but the ABS pump can vary with engine size and GVW/payload rating within that generation. A Combo with a higher payload rating may carry a heavier braking system than a lighter-rated example, so check the vehicle identification plate in the door shut for the GVW figure and match it with the donor van. Confirm the specific part numbers against your registration with the breaker before purchasing.

The B-series and C-series Combo are distinct generations with different platform underpinnings, so crossing that 2012 boundary is a significant step and direct swap is unlikely. The hydraulic and electronic specifications of the ABS pump changed between generations, meaning connectors, mounting and the pump unit itself will probably differ. Route this question to the breaker and quote both registrations so they can compare part numbers before you commit.

Yes, engine size and the associated GVW or payload rating can influence the braking system specification on a van like the Combo — larger or heavier-rated vans sometimes carry uprated brake components. When sourcing a used ABS pump, tell the breaker your engine size (for example 1.3 CDTi or 1.6 CDTi) alongside the GVW shown on your door plate, not just the model name, to ensure the donor van was matched to a similar specification. This is especially important on the B-series and C-series ranges where multiple engine options were offered.

Trim level alone does not determine ABS pump fitment on the Combo — the pump is part of the running gear, which follows engine size and payload rating rather than trim designation. An S-badged and an SE-badged van with the same engine and GVW rating should use the same ABS pump. Focus on matching generation, engine, and payload rather than worrying about what badge is on the tailgate.

A 2013 Vauxhall Combo sits in the C-series generation, which ran from 2012 through to 2018, so yes, you are looking for a C-series donor van. Give the breaker your full registration number so they can verify the exact ABS pump specification, and also have the GVW figure from your door plate to hand, as payload variants within the C-series can affect brake system specification. Never rely on the model name alone when sourcing running-gear parts from a dismantler.