Findapart

Vauxhall Agila Exhaust System Replacement Parts

Compare prices on a used Vauxhall Agila exhaust system from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Vauxhall Agila exhaust system

No two exhaust systems are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Vauxhall Agila parts

Used exhaust system for other Vauxhall models

Fitment questions

Does an exhaust from an earlier Agila fit a later one – are they the same across the whole production run?

The Aguxhall Agila ran in two distinct generations: the A-series (2000–2004) and the B-series (2004–2007), and exhaust systems are not freely interchangeable between them because the underpinnings, engine line-up and pipework routing changed between generations. Within each generation, fitment is primarily driven by engine code and fuel type, so always match on those rather than assuming year alone is enough. Confirm the exact generation and engine code with your breaker before ordering.

Will a 2003 Agila exhaust fit a 2005 Agila?

A 2003 Agila is an A-series car, while a 2005 Agila is a B-series, and these two generations used different platforms and engine configurations, so a straight swap is unlikely to be correct. Even if a section looks visually similar, the mounting points and pipe dimensions may differ enough to cause fitment problems or MOT issues. Give your breaker both registration numbers and ask them to verify against the engine codes for both vehicles.

Does the trim level – such as Expression, Design or Club – make any difference to which exhaust I need?

No – on the Agila, trim level (whether Expression, Design, Club or any other grade) does not affect which exhaust system the car uses. What matters is the engine code and fuel type (petrol or diesel), as these determine the pipe diameter, manifold configuration and catalytic converter specification. You may find that parts pulled from different trim grades look cosmetically different in terms of heat shields or finishes, but the core fitment is driven by the engine, not the badge.

Is the catalytic converter from one Agila interchangeable with another?

Catalytic converter compatibility on the Agila depends heavily on engine code, fuel type and the emissions standard the original car was built to, and this is an area where small differences can mean a part that physically fits but causes an MOT failure. Because the detail-level interchange rules for cats are complex and stock varies between breakers, you should confirm the specific part against your registration directly with your breaker rather than assuming a match. Never fit a catalyst that doesn't meet the emissions standard required for your car's year of registration.

I have a petrol Agila and I've been offered a diesel Agila exhaust – will it fit?

No – petrol and diesel exhaust systems on the Agila are not interchangeable, as the pipe sizing, back-pressure requirements and emissions equipment differ fundamentally between the two fuel types. A diesel system fitted to a petrol car (or vice versa) is unlikely to seal correctly, will almost certainly affect performance, and could create an MOT problem. Always match the exhaust to the correct fuel type and engine code for your specific vehicle.

Does it matter which engine size my Agila has when buying a used exhaust?

Yes, engine size and specifically the engine code are among the most important factors for exhaust fitment on the Agila, as different engines used different bore sizes, manifold configurations and cat specifications even within the same generation. A system from a smaller-engined car fitted to a larger-engined one (or the reverse) can cause poor performance, leaks or emissions failures. Always provide your engine code – found on your V5C or visible on the engine block – to your breaker so they can match the correct system.