Findapart

Cheap Vauxhall Adam Water Pump

Compare prices on a used Vauxhall Adam water pump from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Vauxhall Adam water pump

Used water pumps vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Vauxhall Adam parts

Used water pump for other Vauxhall models

Fitment questions

Does the Vauxhall Adam have a water pump?

Yes, all Vauxhall Adam variants have a water pump — it is a petrol-engined, liquid-cooled car throughout its range, so every engine fitted to it requires a water pump to circulate coolant. The Adam was produced from 2013 to 2019 as a single generation with no major generational break, though minor mid-production changes did occur. Whether you have the 1.0 Ecotec turbo, the 1.2, or the 1.4 naturally aspirated engine, a water pump will be present on your car.

Will a water pump from a 2014 Vauxhall Adam fit my 2018 Vauxhall Adam?

The Adam ran as a single generation from 2013 to 2019, but that does not automatically mean all water pumps interchange across the full production run — ancillary and mounting changes can occur mid-production, so crossing that kind of year gap should always be confirmed with the breaker against your registration. The single most important detail to match is the engine code, which you can find on your V5C or via a VIN check, and you should quote this to the breaker rather than relying on year alone. Never assume a match purely because both cars are called Adam.

Does the engine code really matter, or is the year enough when searching for an Adam water pump?

The engine code matters far more than the year for a mechanical part like a water pump — the Adam was offered with at least three different petrol engines (including the 1.0 turbo and the 1.2 and 1.4 naturally aspirated units), and each engine family uses its own pump design regardless of what year the car was built. Two Adams built in the same year could have completely different water pumps if they carry different engine codes. Find your engine code on the V5C or through a VIN check and give it to the breaker — this is the single most useful piece of information you can supply.

Does the trim level affect which water pump a Vauxhall Adam needs — for example, does a Slam need a different pump to a Glam or Rocks?

No — trim level has no bearing on water pump fitment whatsoever. Slam, Glam, Rocks, and any other Adam trim are cosmetic and equipment-level distinctions; the water pump is determined entirely by the engine fitted, not the badge on the back. Two Adams with different trim names but the same engine code will use the same water pump, so do not let trim level distract you when sourcing the part.

I have a 1.0 turbo Adam — is the water pump different to the one on a 1.2 or 1.4 Adam?

Yes, the 1.0 Ecotec turbocharged engine is a fundamentally different engine family to the 1.2 and 1.4 naturally aspirated units, and the water pumps are not interchangeable between them. Always confirm your exact engine code with the breaker — for example, the 1.0 turbo and 1.4 naturally aspirated units carry different codes even though both are common in the Adam range. Quoting your engine code rather than just the displacement gives the breaker everything they need to pull the correct part.

Is a used water pump from a Vauxhall Corsa or Mokka compatible with my Adam?

Vauxhall used shared engine families across several models, so it is possible that a pump from a Corsa with the same engine code could cross over — but this is not something to assume without checking. The engine code is the key: if a Corsa and an Adam share the exact same engine code, the core pump may well be the same unit, but confirm with the breaker because ancillary mounting details or sensor fittings can differ even between compatible engines. Let the breaker match the part to your registration and engine code rather than specifying the donor vehicle yourself.