Used Vauxhall Adam Oil Cooler

Only certain Adam variants were fitted with an oil cooler — specifically those with the 1.4 turbocharged engine (engine code A14NET), where an oil cooler is a genuine factory component. The naturally aspirated 1.2 and 1.4 engines that make up the majority of Adam models were not fitted with one, so if your car has one of those engines you are unlikely to need this part. Check your V5 or run a VIN check to confirm your exact engine code before searching.

The Vauxhall Adam ran as a single generation from 2013 to 2019 with no full mechanical generation change, so an oil cooler from a 2013 car and a 2015 car are potentially compatible provided both carry the same engine code (A14NET). However, ancillary and mounting details can change quietly during a production run, so you should confirm with the breaker against your exact registration before buying. The engine code is the most important detail to share with your breaker.

Trim level — whether your Adam is JAM, GLAM, SLAM, or any other — makes no difference to oil cooler fitment; this is a mechanical component that follows the engine code, not the badge or specification level. What matters is that both cars share the same engine code (A14NET on the 1.4 turbo), so focus on that detail rather than trim when sourcing from a breaker. Cosmetic differences between trim levels are entirely irrelevant here.

The A14NET engine was used across several Vauxhall models including the Corsa D and early Astra, and the oil cooler may well be shared across those applications — but fitment across different body shells can be affected by bracket and mounting differences that are difficult to verify without hands-on comparison. This is worth raising directly with the breaker, quoting your engine code and registration, so they can check the part number against their stock. Never assume cross-model compatibility without confirmation.

The simplest way is to check your V5 registration document or request a VIN check, which will show your engine code — the 1.4 turbo (A14NET) is the variant that carries an oil cooler on the Adam. If your car is a 1.2 (A12XER or similar) or the naturally aspirated 1.4, an oil cooler was not part of the standard fitment and you may be looking for a different component entirely. If you are unsure, describe your symptoms or the part you have removed to a breaker and they can help identify what you actually need.