Need a used Škoda Yeti wheel arch liner? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two wheel arch liners are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Škoda Yeti ran from 2009 to 2017, with a facelift introduced in 2013 that brought restyled bodywork including changes to the front end and lower body panels — which can affect arch liner profiles. Liners from a pre-facelift (2009–2013) Yeti may not match those from a post-facelift (2013–2017) car, so if you are sourcing a liner that crosses that 2013 boundary, confirm with the breaker against your registration before buying.
No — wheel arch liners are body-side panels and have nothing to do with the engine fitted to your Yeti, whether that is a 1.2 TSI, 1.4 TSI, 1.8 TSI, 1.6 TDI, or 2.0 TDI. The liner is the same regardless of whether your car is front-wheel drive or 4x4. Focus on the model year and which corner of the car you need (NS front, OS rear, and so on) rather than the engine code.
Trim level alone does not change the wheel arch liner required — the liner fits the bodyshell, not the specification level. However, Outdoor trim Yetis can have additional body cladding and protective mouldings around the arches, so a liner from a standard trim car should still fit behind the scenes, but the visible edge trim or cladding may look different. Mention your trim to the breaker so they can match the full arch area appearance if that matters to you.
Yes — wheel arch liners are handed, meaning the nearside (passenger side, NS) and offside (driver side, OS) are mirror images of each other and are not interchangeable. You also need to specify whether you need a front or rear liner, as those are completely different shapes. Make sure you give the breaker all four details: NS or OS, front or rear, your registration, and your model year.
Yes, wheel arch liners are a genuine factory-fitted part on the Škoda Yeti across all variants — they are standard on this type of crossover/SUV body to protect the inner arch from road debris and moisture. Every Yeti, regardless of engine, drivetrain, or trim level, will have had them fitted from the factory. Used examples are widely available from breakers, so search by year range and arch position to find a suitable match.
A 2010 Yeti is a pre-facelift car and a 2015 Yeti is a post-facelift car, and the facelift in 2013 brought changes to the exterior bodywork that are likely to affect arch liner fitment at least on the front corners. Whether a specific liner from a 2010 car physically fits a 2015 car is something you should confirm directly with the breaker using both registrations — do not assume they will interchange across that 2013 facelift boundary.