Compare prices on a used Škoda Kamiq roof panel from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two roof panels are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Kamiq launched in the UK in 2019 and has continued from there as a single generation built on the MQB-A0 platform; a mid-life refresh arrived for the 2022 model year, though whether this brought any pressing changes to the roof panel itself is something you should confirm with the breaker against your registration rather than assume either way. For fitment purposes the key facts are the shared platform and the consistent five-door hatchback body style throughout the model's run. Always quote your registration to the breaker so they can verify the exact panel.
The 2019–2020 cars and the 2023 car sit within the same single Kamiq generation on the MQB-A0 platform, so they share the same basic body structure and five-door hatchback shell. However, because your question spans the 2022 refresh, whether the roof pressing itself changed at that point is something you need to confirm with the breaker against both registrations before buying. The breaker will be able to compare part numbers and tell you definitively if the panels interchange across that boundary.
Trim level does not affect roof panel fitment on the Kamiq — the S, SE, SE Drive, and Monte Carlo all share the same body shell and roof pressing. The one cosmetic difference to be aware of is that Monte Carlo models may have come with a contrasting black roof finish from the factory, so a panel from a standard-colour car will need repainting to match if you're replacing one on a two-tone Monte Carlo. Confirm the colour finish requirement with your bodyshop, but the panel itself will fit regardless of which trim the donor car was.
No — engine choice has no bearing whatsoever on roof panel fitment for the Kamiq. Whether the donor car was a 1.0 TSI, 1.5 TSI, or any other engine variant, the roof panel is identical. Focus your questions to the breaker on the model year and body style, not the engine.
The Arona, T-Cross, and Kamiq are all MQB-A0 based, but whether the roof panel pressing is interchangeable between these different-branded models is not something that can be stated as fact here — you must confirm this directly with the breaker by comparing part numbers against your specific registration. Bodies sharing a platform do not automatically share every pressed panel, and subtle differences in roofline, glazing apertures, or pressing contours can make a panel a non-fit even if it looks similar. A good breaker will be able to check this for you before any money changes hands.
Give the breaker your full registration number so they can pull the exact build spec, and also supply the registration of the donor vehicle if you have found one advertised. Key details to confirm are the model year relative to the 2022 refresh, and the colour code if you want to minimise repainting — especially relevant on Monte Carlo two-tone cars. The breaker can then cross-reference part numbers and confirm fit before you commit to buying.