Findapart

Cheap Škoda Enyaq Roof Panel

Compare prices on a used Škoda Enyaq roof panel from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Enyaq roof panel

Used roof panels vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Škoda Enyaq parts

Used roof panel for other Škoda models

Fitment questions

Will a roof panel from an early Enyaq fit a later one – does the Enyaq have any facelift or generation change I need to worry about?

The Škoda Enyaq launched in 2021 on Volkswagen Group's MEB platform, and a facelift – the Enyaq updated model – arrived for the 2025 model year, bringing revised exterior pressings including changes to the roofline area. A roof panel from a pre-facelift 2021–2024 car is unlikely to be a straightforward swap onto a post-facelift 2025-on car, but whether the pressing itself changed at that boundary is something you must confirm with the breaker against your registration before ordering.

Does it matter whether my Enyaq is a hatchback or the Enyaq Coupé – will the roof panel swap between them?

Yes, this matters enormously: the standard Enyaq has an upright five-door hatchback roofline, while the Enyaq iV Coupé has a distinctly raked fastback roofline, and the two roof panels are completely different pressings. Always tell the breaker exactly which body style you have – hatchback or Coupé – before they pull a part.

Does my trim level affect which roof panel I need – will a panel from an Enyaq 60 fit an Enyaq 80 or a Sportline?

Trim level – whether your car is a 60, 80, Sportline, L&K, or any other grade – has no effect on which roof panel fits, because the pressing is determined by body style and generation, not by how the car is equipped. You may find that higher trims came with a panoramic glass roof from the factory, which would mean the donor car's panel has a large aperture cut into it, so make sure the panel you source matches whether your car has a panoramic roof or a solid roof.

I have a 2022 Enyaq – will a roof panel from a 2024 car of the same body style fit it?

Both a 2022 and a 2024 Enyaq sit within the same pre-facelift generation (2021–2024) on the MEB platform, so they share the same fundamental body structure and the roof panel should correspond. That said, it is worth asking the breaker to check the exact pressing details against both registrations, as minor production changes within a generation cannot always be ruled out from a distance.

Does it matter which engine or battery size my Enyaq has when sourcing a replacement roof panel?

No – engine variant and battery size (whether it is a rear-wheel-drive 60, 80, or an 80x four-wheel-drive, for example) make no difference whatsoever to the roof panel, as these are purely drivetrain differences and the body pressing is identical across those variants for a given body style and generation. Focus your search on matching body style, generation, and whether the car has a panoramic roof aperture or not.

Could a roof panel from a VW ID.4 or CUPRA Born fit my Enyaq, given they share the MEB platform?

The Enyaq, ID.4, and CUPRA Born do all share Volkswagen Group's MEB platform, but platform-sharing does not mean the exterior body panels are the same – each model has its own distinctive pressings and roofline dimensions. Whether any specific panel from a same-platform sibling actually interchanges with your Enyaq is something you must confirm with the breaker against your registration, as we cannot state that as fact here.