Findapart

Second Hand Škoda Octavia Inlet Manifold

Compare prices on a used Škoda Octavia inlet manifold from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Octavia inlet manifold

No two inlet manifolds are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Octavia parts

Used inlet manifold for other Škoda models

Fitment questions

Does an inlet manifold from a 2010 Octavia fit a 2008 Octavia with the same engine?

The Škoda Octavia Mk2 ran from 2004 to 2013, with a facelift in 2008, so a 2010 and a 2008 car sit on either side of that facelift boundary. Engine code is the critical factor here — if both cars share the same engine code, fitment is likely, but ancillary mounting and vacuum port changes can occur mid-production, so confirm the specific part number against your registration with the breaker before buying.

Will an inlet manifold from a 2017 Octavia fit my 2015 Octavia?

Both years fall within the Mk3 Octavia generation (2013–2020, facelifted 2017), so a 2015 and a 2017 car sit on either side of the Mk3 facelift boundary. Matching the engine code exactly is the most important step, but detail changes can accompany a facelift refresh, so confirm compatibility against your registration with the breaker rather than assuming year-to-year swaps are straightforward.

Does the trim level matter — will an inlet manifold from an SE fit an Octavia S or vRS?

Trim level — whether S, SE, SE Technology, SE L, or vRS — has no bearing on inlet manifold fitment; what matters is the engine code, which is shared across trims that use the same unit. The only real-world consideration is that the vRS uses higher-output versions of certain engines which may have a differently specified manifold even where the base code looks similar, so match engine codes precisely and confirm with the breaker against your registration.

Does the Škoda Octavia actually have an inlet manifold — I've heard some modern engines don't?

Yes, all petrol and diesel engine variants of the Škoda Octavia have an inlet manifold — it is a fundamental engine component that directs the air-fuel mixture or air into the cylinder head on every internal combustion layout used in this model. The design and material differ between engine families (for example, variable-geometry plastic manifolds on many VAG petrol units versus the configuration used on TDI diesels), which is why the engine code is essential when sourcing a used one.

I only know my Octavia is a 2.0 TDI — is that enough to find the right inlet manifold?

A 2.0 TDI badge covers several different engine codes across Octavia generations — for example, codes such as BMM, BKD, CFHC, and CEGA have been used, and each can have a differently designed inlet manifold. The engine code, which you can find on your V5C or via a VIN check, is the single most reliable detail to give a breaker; quoting just the displacement and fuel type risks ordering an incompatible part.

Can I use an inlet manifold from an Octavia Estate on a hatchback, or vice versa?

Body style makes no difference to inlet manifold fitment — the manifold is determined entirely by the engine, not by whether the car is a hatchback or estate. Both body styles were offered across the Octavia range using the same engine options, so as long as the engine codes match, the manifold will be the same unit; confirm the engine code with your breaker to be sure.