Get quotes for a used or replacement Škoda Scala inlet manifold. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two inlet manifolds are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
All petrol-engined Scalas have an inlet manifold, as it is a fundamental part of how the engine draws in air and fuel mixture. The Scala's diesel variant (the 2.0 TDI) also has an inlet manifold, though its design differs from the petrol units, so fuel type matters when sourcing a replacement. There is no variant of the Scala that lacks an inlet manifold entirely, but the correct part depends heavily on your specific engine.
The Škoda Scala launched in the UK for the 2019 model year and received a facelift in 2022, so a pre-facelift manifold and a post-facelift manifold may not be the same part. Because your engine code is what truly determines whether a manifold will physically interchange across that 2022 boundary, you should confirm with the breaker using both your registration and the engine code from your V5. If both cars share an identical engine code, fitment is far more likely, but ancillary mounting points or sensor positions can differ mid-production, so the breaker should verify against your reg before you commit.
Trim level alone does not determine which inlet manifold is fitted — the Scala's SE, SE L, and Monte Carlo trims are all based on the same fundamental engine options, so a manifold from an SE with a matching engine code should physically be the same part as one from a Monte Carlo with that same code. You may find cosmetic or badging differences on surrounding components, but the manifold itself follows the engine, not the trim. Always cross-reference the engine code to be certain, rather than relying on trim name alone.
The engine code is the single most important detail — it is printed on your V5 logbook or can be found via a VIN check, and it tells a breaker exactly which manifold family your engine uses. You should also know whether your car is petrol or diesel, as the manifold designs are quite different between the 1.0 TSI and 1.5 TSI petrol engines versus the 2.0 TDI diesel. Providing your registration number alongside the engine code when contacting a breaker gives them the best chance of matching the correct part to your car.
The Scala is built on the Volkswagen Group MQB-A0 platform and shares engine families with the SEAT Ibiza, SEAT Leon, and Volkswagen Golf range, which means cross-platform manifold compatibility is genuinely possible where engine codes match. If a donor car from one of those models carries the exact same engine code as your Scala, the core manifold is likely the same casting. However, sensor positions, vacuum ports, or mounting brackets can differ between installations, so confirm the specific part number with a breaker before purchasing rather than assuming platform compatibility guarantees a straight swap.
An inlet manifold is a mechanical component and does not itself require electronic coding or pairing to your ECU in the way that, for example, an engine control unit or fuel injector set might. However, if your manifold includes an integrated sensor or actuator — such as a variable intake flap motor — you should confirm with your breaker and fitting garage whether any adaptation procedure is needed for your specific setup. This is particularly worth checking on the 1.5 TSI engine, which features active cylinder management technology that interacts with the intake system.