Compare prices on a used Škoda Yeti front cross member from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
The Škoda Yeti was produced as a single generation running from 2009 to 2017, with a facelift introduced in 2013 that brought styling and equipment changes. Cross members from the pre-facelift (2009–2013) and post-facelift (2013–2017) cars may differ, so always confirm with your breaker whether the part from a specific year suits your registration. Never assume a part fits based on year alone without the breaker checking against your VIN.
These two cars sit either side of the 2013 facelift boundary, which is exactly the kind of crossover that needs careful checking. While the underlying platform remained the same throughout the Yeti's life, subtle changes around the facelift can affect subframe and cross member fitment. Name both registration plates to your breaker and ask them to verify the part number before agreeing a sale.
Larger engines and four-wheel-drive variants can alter the loads and mounting arrangements that a cross member has to handle, so engine size and drivetrain are relevant when sourcing this part. A 1.2 TSI front-wheel-drive Yeti and a 2.0 TDI 4x4 Yeti may not share the same cross member. Always give your breaker your exact engine code and drivetrain so they can match the correct unit.
Trim level does not affect front cross member fitment on the Škoda Yeti — the structure is determined by the generation, engine, and drivetrain, not by whether the car is an S, SE, Elegance, or Laurin & Klement. You may find cosmetic differences such as brackets or fixings for different front-end styling if the donor car had a different trim, but the cross member itself is a chassis component and trim is not a factor. Focus your conversation with the breaker on year, engine size, and whether the car is 2WD or 4x4 rather than the trim name.
It is possible that cross members are shared across some engine variants, but running gear components like this can vary where the physical demands of a heavier or more powerful engine require different mounting strength or geometry. You should give your breaker both the donor engine size and your own engine code so they can check compatibility rather than assuming any Yeti cross member will do. This is especially relevant if you are crossing between a front-wheel-drive and a 4x4 variant.
Give your breaker your full registration number and ask them to check it against the registration of the donor vehicle, paying close attention to the model year relative to the 2013 facelift, the engine size, and whether the car is 2WD or 4x4. A reputable UK breaker will cross-reference part numbers and can often advise on known interchange variations within the Yeti range. Never rely on a part description alone — the breaker confirming fitment against your specific registration is the safest step before purchase.