Need a used Škoda Superb cylinder head? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two cylinder heads are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Superb moved from the Mk2 (2008–2015) to the Mk3 (2015–2023) generation, so a 2015 head could be from either generation depending on the exact build date – these are fundamentally different platforms. Fitment is driven by engine code first, so match the code stamped on your block (found on your V5 or a VIN check) rather than the year alone. A head from the same engine code within the Mk3 generation is your best starting point, but confirm the specific part numbers with the breaker against your registration before buying.
Trim level – whether Elegance, SE, SE L, or Sportline – has no bearing on cylinder head fitment; the head follows the engine, not the badge or equipment level. What matters is that the engine code on the donor car matches yours exactly, along with fuel type and gearbox type where relevant. Confirm the engine code with the breaker against your registration to make sure you're sourcing from an identical unit.
The engine code is the single most important detail for matching a cylinder head – it tells a breaker exactly which variant of the engine was fitted, far more reliably than year or trim. You'll find the engine code on your V5 logbook or by running a VIN check; it's typically a three-letter code such as CDAB or CZAA on common Superb units, though the full range across the Mk2 and Mk3 is wide. Give the breaker your full engine code and registration together so they can cross-reference their stock accurately.
The 2013 car sits in the Mk2 generation (2008–2015) and the 2016 car in the Mk3 (2015–2023), so these are different platforms and the heads are not a straightforward swap even if the engine displacement looks similar. Some engine codes did carry across VAG Group platforms, so the engine code is what really matters here, but crossing a generation boundary like this raises a real risk of incompatibility. Route this to the breaker with both engine codes and both registrations before committing to a purchase.
For a cylinder head specifically, the gearbox type – whether manual or DSG – does not normally determine which head is fitted, as that's set by the engine code. However, some ancillary brackets or sensor configurations can differ between drivetrain setups within the same engine family, so it's worth mentioning your gearbox type to the breaker when you enquire. Confirm any ancillary fitment details against your registration with the breaker rather than assuming everything bolts straight on.
No – petrol and diesel cylinder heads are entirely different in design, compression ratio, combustion chamber shape, and injector or glow-plug provisions, and they are not interchangeable under any circumstances. Always source a head that matches your fuel type exactly, and then narrow it down further by engine code. Give the breaker your engine code and registration to make sure the donor head is from an identical engine.