Get quotes for a used or replacement Škoda Roomster anti roll bar. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used anti roll bar that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
The Škoda Roomster was produced as a single generation from 2006 to 2015, with a facelift arriving in 2010, so there is only one generation to consider. Anti roll bars are fitted to the Roomster on both the front and rear axles, and while the basic platform did not change, minor revisions around the 2010 facelift mean you should confirm with the breaker that the bar from a pre-2010 car will match your post-2010 registration before buying. Never assume fitment across that boundary without checking.
Engine size can influence suspension and braking components on some cars, but on the Roomster the anti roll bar dimensions are generally consistent across the petrol engine range rather than varying with engine output. That said, it is always worth confirming with the breaker against your specific registration to rule out any variant differences, particularly if your car has a heavier diesel or a higher-output engine. Do not take fitment for granted without that check.
Yes, the Škoda Roomster does have anti roll bars — there is one at the front axle and typically one at the rear axle as well, as it uses a conventional torsion-beam rear suspension setup on most variants. This is a real part you can source from a breaker, and it is sometimes also called a stabiliser bar or ARB. Both the drop links and the bar itself are available used from Roomster dismantlers.
Trim level alone does not determine which anti roll bar is fitted to a Roomster — the bar is part of the running gear rather than a cosmetic feature, so a Classic, Scout, or any other trim designation does not in itself mean a different bar. What matters more is the axle (front or rear) and the engine or weight variant of the car, so always confirm against your registration with the breaker. If a previous owner fitted aftermarket or sport suspension, that could affect drop link length or bar diameter, but that is something to raise directly with the breaker rather than assume from the trim badge.
The 2010 facelift is the main boundary within the Roomster's 2006–2015 lifespan, and while the underlying platform remained the same, suspension components can see subtle running changes around a facelift. A bar from a 2011 car might well be compatible with a 2006–2009 car, but you should confirm this with the breaker using your registration plate rather than assuming the years are interchangeable. Routing this across the facelift boundary to a breaker with access to parts data is the safest approach.
No — the front and rear anti roll bars on the Roomster are different components with different dimensions and mounting points, so make sure you tell the breaker clearly whether you need the nearside or offside drop link and which axle the bar is from. The front axle uses a conventional MacPherson strut setup and the rear uses a torsion beam, so the bars are not interchangeable between axles. Always quote your registration to the breaker so they can match the correct part to your specific car.