Compare prices on a used Škoda Octavia flywheel from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used flywheel varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Octavia has run through four main generations — Mk1 (1997–2010), Mk2 (2004–2013), Mk3 (2013–2020, facelifted 2017), and Mk4 (2020–present) — and flywheels are not generally interchangeable across these boundaries due to changes in engine and transmission architecture. Your engine code is the critical detail: two Octavias from different generations sharing the same engine code family are far more likely to be compatible than two from the same generation with different engines. Confirm any cross-generation swap with the breaker against your exact registration and engine code before ordering.
Not quite — only Octavias with a manual gearbox have a conventional flywheel; those fitted with a DSG dual-clutch automatic use a different assembly, sometimes called a dual-mass flywheel integrated into the DSG system, and traditional automatics use a flexplate (driveplate) instead. It's worth knowing which gearbox type your car has before searching, as the parts are completely different. Check your V5 or a VIN lookup to confirm your gearbox type, then make sure you're asking for the right component.
No — engine displacement and engine code directly determine flywheel specification, so a 1.6 TDI flywheel will not suit a 2.0 TDI, even within the same generation. The flywheel is matched to the engine's bolt pattern, mass, and clutch mating surface, all of which differ between these engines. Always quote your exact engine code (found on your V5 or via a VIN check) when getting quotes from a breaker.
Trim level — whether that's S, SE, SE L, or vRS — has no bearing on flywheel fitment whatsoever. What matters is the engine code, fuel type (petrol or diesel), and gearbox type (manual or DSG). The one thing worth noting with vRS models is that they typically carry higher-output engine variants which may have a different flywheel spec to the same-displacement engine in a lower trim, so always verify by engine code rather than badge.
The Mk3 Octavia ran from 2013 to 2020, with a facelift arriving in 2017, and in many cases the flywheel will be the same across pre- and post-facelift cars if the engine code is identical. However, there can be ancillary or mounting changes introduced mid-production that aren't always obvious, so you should confirm compatibility with the breaker by quoting both your registration and your full engine code. Never assume fitment purely on the basis of shared generation or year range.
No — petrol and diesel flywheels are engineered for entirely different engines and are not interchangeable, even if the cars are the same model and year. Diesel engines produce significantly different torque characteristics, which means the flywheel mass and design differ considerably from their petrol equivalents. Always specify your fuel type alongside your engine code when contacting a breaker.