Compare prices on a used Škoda Octavia engine from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used engine that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Also known as: motor.
The Škoda Octavia Mk2 ran from 2004 to 2013 (facelift 2009) and the Mk3 from 2013 to 2020 (facelift 2017), so these are different generations with different engine mounting arrangements, subframes, and ancillaries, meaning a straight swap across that 2013 boundary is highly unlikely. The engine code is the definitive guide here — even if two engines share a code across generations, confirm with the breaker against your registration before purchasing, as ancillary and mounting compatibility can vary mid-production. Never assume a match based on displacement or badge alone.
Yes — for an Octavia engine, the code stamped on the block (and listed on your V5 or via a HPI/VIN check) is the single most useful detail you can give a breaker, because Škoda used the same engine codes across multiple model years and even across Octavia generations in some cases. Quoting only the year risks being matched to the wrong variant, especially around the Mk2 facelift (2009) and Mk3 facelift (2017) where internal changes were made. Always find your engine code before contacting a breaker.
Both sit within the Mk3 generation (2013–2020), so there is a reasonable chance of compatibility if the engine codes match, but Škoda introduced changes to some engines around the 2017 facelift that can affect ancillaries and mountings. Confirm with the breaker against both registration numbers, giving them the engine code from your V5 or a VIN check, so they can verify the donor unit is the right specification. Matching engine codes give you the best starting point, but fitment is not guaranteed without that check.
For the mechanical engine unit itself, trim level — whether SE, SE L, Edition, or vRS — does not affect fitment provided the engine code matches, because the engine follows the code, not the badge. The vRS does use distinct high-output engine variants (for example turbocharged petrols and diesels with different codes), so make sure the code on your vRS matches the donor unit exactly rather than assuming any same-displacement engine will do. Trim differences between SE and SE L are cosmetic and irrelevant to engine fitment.
No — petrol and diesel engines are fundamentally different and are not interchangeable; the fuel system, engine management, ancillaries, and often the subframe mounts are specific to each fuel type. Always confirm your fuel type and engine code with the breaker, as mixing these up is one of the most common and costly ordering mistakes on used engines. Your V5 will state the fuel type clearly.
The year alone is not enough and could lead to the wrong engine being supplied, particularly around generation and facelift boundaries such as 2009 (Mk2 facelift), 2013 (Mk2 to Mk3), and 2017 (Mk3 facelift). The engine code — found on a sticker or stamp on the block, on your V5, or via a VIN check through a reputable data provider — is what the breaker needs to match the donor unit accurately. Providing the full registration alongside the engine code gives the breaker the best chance of sourcing the correct unit for your vehicle.