Get quotes for a used or replacement Škoda Octavia indicator stalk. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
The Octavia Mk3 ran from 2013 to 2020, with a facelift arriving in 2017 that updated several interior components including the steering column stalk assembly. Parts from within the pre-facelift 2013–2017 window are most likely to interchange with each other, as are parts within the post-facelift 2017–2020 window, but whether a stalk crosses that 2017 boundary is something you should confirm with the breaker against your exact registration. Never assume a pre- and post-facelift stalk are the same fit without checking.
These sit either side of the Mk3 facelift boundary — 2015 is pre-facelift and 2018 is post-facelift — and Škoda updated the steering column controls around the 2017 refresh. The stalk connector and mounting may differ, so this is a cross-boundary swap that you should route to the breaker, quoting both registrations, before buying. Don't rely on the part looking similar as a guide to fitment.
For an indicator stalk, trim level does not affect fitment; the stalk is determined by the generation and any facelift revision, not by whether the car is an S, SE, SE Technology, or vRS. You may find cosmetic differences such as the finish or the presence of additional cruise-control or lane-assist buttons on higher-spec stalks, but the physical mounting and connector are what matter for fitment. Confirm the specific stalk variant with the breaker if your car has optional driver-assistance features that integrate into the stalk.
No — engine choice (petrol, diesel, or hybrid) has no bearing on indicator stalk fitment for the Octavia. What matters is the generation (Mk2 2004–2013 or Mk3 2013–2020) and whether your car is pre- or post-facelift within that generation. Give the breaker your full registration so they can pinpoint the exact stalk, especially if your car has steering-wheel-mounted controls that link to the stalk assembly.
The Mk2 Octavia ran from 2004 to 2013 and the Mk3 from 2013 to 2020, and these are distinct generations with different steering column and stalk designs. A Mk2 stalk will not be a straightforward fit on a Mk3, and crossing this generation boundary is not recommended. Stick to sourcing a stalk from the correct Mk3 generation, and confirm pre- or post-facelift with the breaker using your registration.
VAG-group models of the same era sometimes share stalk components, and the Octavia Mk3 sits on the MQB platform which it shares with several Volkswagen and Škoda models. However, whether a specific stalk from a Superb, Golf Mk7, or other MQB car will physically and electrically match your Octavia depends on the exact connector, software coding, and any integrated functions — this is not something to assume. Put the question to the breaker with both registrations and let them cross-reference the part numbers before you buy.