Findapart

Cheap Škoda Kamiq Fog Light

Need a used Škoda Kamiq fog light? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Škoda Kamiq fog light: what matters

Fitment on a used fog light varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Škoda Kamiq parts

Used fog light for other Škoda models

Fitment questions

Do Škoda Kamiq fog lights actually exist, or is it a fog light delete model?

Fog lights were available on the Kamiq but were not fitted to every car - they were an optional or trim-dependent feature rather than standard across the range, so some Kamiqs left the factory without them. If your car did not come with fog lights originally, you would need to check whether the bumper has the cut-outs and whether the wiring loom includes the fog light circuit before sourcing a used unit. A breaker can advise on the housing and switch, but confirm with them whether your specific registration was factory-fitted with fog lights before ordering.

Will a fog light from a 2020 Kamiq fit my 2023 Kamiq?

The Kamiq launched in 2019 and received a facelift in 2021, which brought changes to the front bumper, grille and light clusters. A 2020 car is pre-facelift and a 2023 car is post-facelift, so the two sit either side of that boundary and the fog light housings are unlikely to be a straight swap. Name the facelift year (2021) as your key reference point, and confirm with the breaker whether the specific part you are looking at crosses that boundary before buying.

Does a pre-facelift 2019 or 2020 Kamiq fog light fit another pre-facelift car?

Within the pre-facelift Kamiq range (2019 to 2021), front-end panels including fog light housings are generally shared because the bumper design did not change during that period. Any car in that pre-facelift window should be a strong candidate for a matching unit, though you should always confirm the part number with the breaker against your registration to be certain. Driver-side (OS) and passenger-side (NS) units are not interchangeable, so make sure you specify which side you need.

Does the fog light differ between Kamiq trim levels like SE, SE Drive, Edition, or Monte Carlo?

Trim level does not affect the physical fog light housing or its fitment position, so a unit from a base SE car can physically match one from a Monte Carlo in terms of the housing shape. What may differ is whether higher trims came with different lighting technology inside the unit, such as LED versus halogen, and the Monte Carlo in particular sometimes carries a sportier front bumper treatment that could affect the surround. Confirm with the breaker that the lamp type and bezel style match your car's original setup, as the internal specification can vary even within the same generation.

Is the Kamiq fog light the same as the one used on the Škoda Karoq or Scala?

The Kamiq, Karoq and Scala are all built on Volkswagen Group's MQB-A0 or MQB platform family, but they have different front-end designs with model-specific bumpers and light housings, so the fog lights are not a straightforward cross-model swap. It is possible that some internal components or bulb holders are shared at a parts level, but the housing shape and mounting points differ between models. Stick to Kamiq-specific listings and confirm the part against your registration with the breaker rather than assuming platform compatibility means the parts interchange.

What information should I give a breaker when asking for a used Kamiq fog light?

Give the breaker your registration number so they can confirm whether your car was factory-fitted with fog lights and identify the correct generation and facelift period - this is the most important detail for matching the part. Also tell them which side you need (NS for passenger-side left, OS for driver-side right) and whether your existing unit is halogen or LED if you know, as this can affect compatibility. Having your VIN to hand is also useful if the breaker wants to check the original factory specification.