Findapart

Used Škoda Scala Clutch Slave Cylinder

Need a used Škoda Scala clutch slave cylinder? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Scala clutch slave cylinder

Used clutch slave cylinders vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Škoda Scala parts

Used clutch slave cylinder for other Škoda models

Fitment questions

Does the Škoda Scala even have a clutch slave cylinder?

Only some Scalas have one — it depends entirely on the gearbox fitted. Scalas equipped with a manual gearbox have a clutch slave cylinder (also called a concentric slave cylinder or CSC, typically integrated inside the bellhousing on these platforms), whereas Scalas fitted with a DSG dual-clutch automatic gearbox do not use a conventional clutch slave cylinder in the same way and this part would not apply. Check your V5 or a VIN check to confirm whether your car has a manual or automatic gearbox before ordering.

What details do I need to give a breaker when asking for a Škoda Scala clutch slave cylinder?

The single most important detail is your engine code, which you'll find on your V5C logbook or via a VIN check — this tells the breaker exactly which unit was fitted and overrides year or trim alone as a matching guide. You should also confirm your gearbox type (manual or DSG/automatic), as the part only applies to manual-gearbox cars. Providing your registration alongside the engine code gives the breaker the best chance of supplying a correctly matched unit.

The Scala was launched in 2019 — are all years interchangeable for this part, or did anything change?

The Škoda Scala has been produced as a single generation from its 2019 launch, so there is no separate Mk1/Mk2 boundary to navigate, but minor ancillary or mounting changes can occur within a production run without a formal facelift. For this reason, while engine-code matching is the primary guide, you should confirm with the breaker against your specific registration that the unit from a donor car is a direct swap for your year of Scala. A good breaker will cross-reference both the engine code and the registration to verify compatibility.

Does the trim level affect which clutch slave cylinder I need — for example, does a Scala SE differ from an SE L or Monte Carlo?

Trim level makes no difference whatsoever to the clutch slave cylinder fitted — SE, SE L, and Monte Carlo trims all use the same mechanically driven components determined by engine code and gearbox type, not by badge or specification level. What does vary between trims is cosmetic and comfort equipment, none of which affects this part. Simply match on engine code and manual gearbox confirmation, regardless of which trim your car is.

Will a clutch slave cylinder from a VW Golf or SEAT Leon fit my Škoda Scala?

The Scala shares the MQB A0 platform with certain Volkswagen, SEAT, and Škoda group vehicles, and where engine codes are identical the slave cylinder may well be the same part, but cross-model fitment should never be assumed without verification. Breakers experienced with VAG group cars will be able to cross-reference part numbers against your engine code to advise whether a unit pulled from a group sibling is compatible. Always confirm against your engine code and registration rather than relying on platform sharing alone, as ancillary details can differ between models even on the same architecture.

Is a used clutch slave cylinder a reliable buy for a Škoda Scala, and what should I check?

A used clutch slave cylinder from a reputable breaker is a cost-effective option, particularly given that on MQB A0 platform cars the concentric slave cylinder is integrated with the release bearing inside the bellhousing, making it sensible to replace it as a complete unit when the gearbox is already out. Ask the breaker about the mileage and condition of the donor vehicle, and check whether the seal and bearing surfaces appear undamaged if you can inspect before fitting. Having a qualified mechanic assess and fit the part is strongly recommended given the labour involved in accessing it.